XTi-1002 XTi-2002 XTi-4002 XTi-6002 2Ω Stereo (per ch.) 700W 1000W 1600W 3000W 4Ω Stereo (per ch.) 500W 800W 1200W 2100W 8Ω Stereo (per ch.) 275W 475W 650W 1200W 8Ω Bridge-Mono 1000W 1600W 2400W 4200W 4Ω Bridge-Mono 1400W 2000W 3200W 6000W Crown XTI 1002 The Crown XTi Series There's no debate – when you choose Crown's XTi 2 Series, you're choosing one of the most powerful and innovative amplifiers on the market today. That's because the all-new XTi 2 Series amps continue to set the standard for unmatched performance and value, delivering the goods night after night without breaking a sweat. Next Generation Features Peakx Plus Limiters provide the ultimate in system performance and protection by allowing full control over threshold, attack, and release Enhanced Subharmonic Synth section provides user control over frequency, gain and filter type for system-specific tuning 3 User-defined fan mode controls – normal, early and fullspeed – for matching fan performance to a specific application New system monitoring provides software visibility of AC line voltage and power supply temperature Integrated cast-aluminum handles for easy handling and enhanced durability Locking power cord clip provides a secure connection between the amplifier and power cord Updated HiQnet System Architect™ control software Increased number of presets to a total of 50; 49 of which are user definable Crown's Integrated Processing Input EQ 6 parametric filters per channel with adjustable Q, ±15 dB boost/cut. Also adjustable high and low shelving filters. This 8-filter EQ section can be bypassed. Crossover Filters Highpass and Lowpass per channel. Butterworth 6/12/18/24 dB per octave. Linkwitz-Riley 24/48 dB per Octave. Also includes ± 15 dB bandpass gain and polarity control. Output EQ 8 parametric filters per channel with adjustable Q, ±15 dB boost/cut. This 8-filter EQ section can be bypassed. Delay For signal alignment of driver; 50 mS of total delay. SubHarmonic Synth Takes the low-frequency content of the input signal and "synthesizes" a new signal that is the same as the input signal but one octave lower. The new synthesized signal is then mixed with the original signal to create the effect. New: Users now have control over frequency, gain, and filter type. Peakx Plus Limiter User defeatable limiter that allows users to control Threshold, Attack, and Release times. Presets 50 total presets, 49 of which are user-definable. The XTI Series Performance Sensitivity (for full rated power at 4 ohms) 1.4 Vrms Frequency Response (at 1 watt, 20 Hz - 20 kHz) +0 dB, –1 dB Signal-to-Noise Ratio (below rated 1kHz power at 8 ohms) XTi1002/2002/4002: 100 dB (A weighted) XTi6002: 103 dB (A weighted) Total Harmonic Distortion (THD) < 0.5% Damping Factor 20 Hz to 1 kHz > 500 Crosstalk (below rated power) 20 kHz - 1 kHz: > 70 db Input Impedance (nominal) 20k ohms balanced, 10k ohms unbalanced Maximum Input Signal +22 dBu typical AC Line Voltage and Frequency Configurations 100 VAC, 120 VAC, 220-240 VAC 50/60 Hz AC Line Current (120 VAC amplifier playing 1/8 power pink noise into 4 ohms per ch) XTi1002: 6.8A; no more than 38W at idle XTi2002: 8.3A; no more than 38W at idle XTi4002: 10.5A; no more than 38W at idle XTi6002: 15.3A; no more than 180W at idle Operating Temperature 0°C to 40°C at 95% relative humidity (non-condensing) Controlling your Crown XTI Amplifier Level Two front-panel rotary level controls, one for each channel Power Switch On/Off switch applies AC power to the amplifier Sel/Prev/Next Buttons Three buttons near the LCD screen that are used to access menu items and front panel lockout LCD Screen Backlit liquid crystal display that shows preset and processing status The In's and Out's on the XTI Series Input Connectors XLR, one per channel Link/Out Connector Loop-thru signal from input connector for linking another amplifier, one per channel. Output Connectors Two Neutrik Speakon NL4MP output connectors. Channel-1 Speakon® is wired with Ch. 1 and Ch. 2 outputs for use with optional single 4-conductor cable. Two binding post outputs (in parallel with Speakon® connectors). HiQnet USB Connector Type B, connects to HiQnet network. Crown XTi Series Amplifier Construction Chassis Steel Front Panel Cast-aluminum Cooling Proportional speed fan with front-to-rear airflow. Dimensions XTi 1002/2002/4002: 19" (W) x 3.5" (H) x 12.25" (D) XTi 6002: 19" (W) x 3.5" (H) x 16.2" (D) Net Weight XTi 1002/2002/4002: 18.5 lbs (8.4kg) XTi 6002: 24.0 lbs (10.9kg) Shipping Weight XTi 1002/2002/4002: 21.5 lbs (9.8kg) XTi 6002: 30.0 lbs (13.6kg)
Related
Related
Related
Related