Crowne Leveling Clips — Flat Floors, Zero LippageLarge-format tile shows every imperfection, and even a hair of lippage between tiles catches the eye and the toe. Crowne Leveling Clips are the working half of a clip-and-wedge leveling system: the clip slips under adjacent tile edges, and a wedge drives in on top to pull those tiles into the same plane and hold them there while the adhesive cures. The result is a dead-flat surface with clean, even joints — no high corners, no lippage.At 400 clips per bag, there's enough here to level a whole floor without running short mid-job. Pair them with Crowne Wedges to complete the system — the clips are the single-use base, the wedges do the squeezing and pull back out for the next set.Why Tile Pros Choose It Kills lippage: Pulls adjacent tiles into the same plane as the mortar sets Large-format ready: Keeps big, unforgiving tile flat and even Clean joints: Holds consistent spacing while the adhesive cures Fast to set: Slip the clip, drive the wedge, move on System fit: Works hand-in-hand with Crowne Wedges Bulk count: 400 per bag — enough for whole-floor jobs Honest about its role: The clip gives its life so your floor can be flat Pro tip: Set clips a consistent distance from each tile corner and along long edges where lippage shows most, and don't over-drive the wedge — snug until the faces pull flush, no more. Once the adhesive has cured, knock the clips off parallel to the joint so the base snaps cleanly below the surface.
