▼ Download Brochure▼ Download User Manual▼ Download User Model Comparison Chart AVAILABILITY: This item is usually dispatched same dayThe DXL4-D Cable Avoidance Tools from C.Scope represent a significant advance in cable detecting performance. The DXL4-D has full data logging capability and the modes of detection have been enhanced to allow the DXL4-D Cable Avoidance Tool to successfully detect even the hardest to find pipes and cables. Particular attention has been paid to effect better working practices and to minimise the potential for human error to impact on operating performance.The C.Scope DXL4 Cable Avoidance Tool has four detecting modes, each with their own unique advantages.POWER Mode: The quickest way to detect most buried electricity cables by detecting the signal created by the electrical current itself.RADIO Mode: Detects re-radiated "radio" type signals that are often present on metal pipes and cables allowing their position to be determined using the DXL alone.GENERATOR Mode: Used to detect the signal applied to a metal pipe or cable by a C.Scope SGA or SGV Signal Generator. In addition the Generator mode can be used to detect the signal being transmitted by a C.Scope Sonde for non-metallic pipe tracing. In both instances the depth of the pipe or cable or Sonde can be displayed at the press of a button. ALLSCAN Mode: Detects ALL frequencies of signal from the lowest of the Power signals right up to and including 33kHz. This great all-in-one mode can detect unusual frequency signals often overlooked in the conventional Power, Radio and Generator modes and can often speed up the locating process with just one sweep of the site. DEPTH INDICATION: Note the DXL4-D does not give depth readings without the use of a SGA4 Signal Generator or 33kHz Sonde transmitter. The cable depth is typically within ±10% of the indicated depth displayed on this DXL4-D. The DXL4-D will typically detect conductors to the following depths: Power Mode - 3 metres Radio Mode - 2 metres Generator Mode - 3 metres Please note that site conditions such as soil, moisture and temperature can affect these depth performance levels.FEATURES: Sensitivity control Depth reading Detachable and user replaceable loudspeaker User replaceable base protector Display shows signal strength, battery condition, operating mode DXL4 Dual Frequency Cable Avoidance Tool with depth measurement Power Mode (50Hz-400Hz) Radio Mode (10kHz-30kHz) Generator Mode: Simultaneous 33+131kHz AllScan Mode Accurate Depth Indication Overload Protection AlarmZone™ PeakHold Dynamic Swing Sensor Automatic Daily Self Test Data Logging of all Locator activity Data Transfer by USB High Resolution Backlit Liquid Crystal Display No periodic Calibration required Product Validation Certificate available SPECIFICATIONS: Moisture & Dust resistant : IP65 Generator Mode: Simultaneous 33+131kHz Battery Life: 40 hours intermittent use at 20 deg C Batteries: 8 x AA Location Accuracy: 10% of depth Response Width: 5% of depth Range from Signal Generator: Direct connect 20-400m, Induction mode 20-100m Weight: 2.6 Kg (including batteries) Sensitivity at 1 metre (typical): P - 5mA RMS, R - 25uA RMS, G - 5uA RMS Temperature Range: -20°C to +50°C Dimensions: 720 x 280 x 65mm Warranty: 3 Years
