CUAV CAN PDB Features: 1–Support 14~60V voltage input, 110A current. 2–0.1A, 0.05V power measurement accuracy 3–14 PWM outputs 4–5V/6A and a 12V/4A stabilized output 5–Thickened tinned PCB to reduce internal resistance 6–Power indicator LED, visually display battery voltage status Set CAN PDB Only, CAN PDB With V5+ Core, CAN PDB With X7+ Core, CAN PDB With X7+ Pro Core Material Metal Upgrade Parts/Accessories Flight controller RC Parts & Accs Speed controller Size 89*42.5*33mm Use Vehicles & Remote Control Toys Technical parameters KV1100 Remote Control Peripherals/Devices Remote Controller Four-wheel Drive Attributes Battery Introduction: CAN PDB is a multi-functional baseboard of CORE controller, which provides abundant interfaces, integrates the functions of power module and power distribution board, and supports voltage input of 14~60V, and provide continuous working current up to 110A. It adopts self-developed ITT algorithm and has high accuracy power detection of 0.1 A and 0.05V. It has 10 power output welding points and provides a 5V/ 6A and a 12V /4A stabilized output to provide power for external device. Supports the CORE modules of V5+, X7+, and X7+ Pro Controller. Main Parameter MCU STM32F412(32 Bit Arm® Cortex®-M4, 100MHz, 512KB FLASH, 256KB RAM) Operating Voltage 14 ~ 62V（4 ~ 15S Lipo) Detection Current Range 0 ~ 110A Output Power(MAX) 6000W（last 120s） Stable Output Power(MAX) 5500W Core V5+ / X7+ / X7+ Pro CORE Frame Type Plane/VTOL/Copter/Heli/Rover/Sub Controller Firmware ArduPilot 4.0.0 and above firmwarePX4 1.11.0 and above firmware Operating Temperature -20 ~ 100℃ Interface V_OUT 5V(default)/7.4V/8.2V(4A） Servo VCC 5V(default)/7.4V/8.2V(8A） 12V OUT 4A(max) USB 1 UART1 5(GPS/UART4/TELEM1/TELEM2/DEBUG) CAN 2 I2C 3 SBUS/DSM IN 1 PPM IN 1 Servo 14 ADC3.3 1 ADC6.6 1 SBUS Outs 1(This interface is invalid when using X7+/X7+pro core) RSSI 3.3V(Analog input) DSU7 1 Size 12.8cm (length) * 10.0cm (width) *1.2cm (height) Weight 200g (including cable) Wire Length 30cm
Related
Related