CUAV V5 Nano Flight Controller | Drone Autopilot PX4 APM Product description /V5 nano flight controller FMUv5 standard design The V5 nano® is an autopilot designed by the CUAV® and PX4 teams for businesses or enthusiasts who are extremely sensitive to space but want to get the power of V5. Its design is based on the Pixhawk FMUv5 standard and is perfectly compatible with PX4 and ArduPilot firmware. Previous Next Tiny & Powerful The V5 nano is smaller in design than the V5, but its performance is not compromised. It is equipped with a high-performance STM32F765 processing chip and four sets of full-interface isolation protection chips to avoid electrostatic breakdown. The IO level is not compatible with the problem of breakdown master. Dual platform compatible Support the current mainstream PX4 and Ardupilot two open source platform firmware to meet the needs of different users. Multi-sensor redundancy combination Built-in five sets of sensors, the flight controller monitors the multi-channel sensor data in real time, and performs redundant switching immediately after a fault, improving flight safety and stability. Custom 2.6mm pitch IO Customizing 2.6mm pitch IO for V5 nano, solving the problem of multiple interfaces being crowded and difficult to disassemble. Specification /V5 nano flight controller Hardware parameter Processor STM32F427 sensor Accelerometer ICM-20608 Gyro ICM-20608 Compass HMC5983 Barometer MS5611 Interface Mavlink UART 2 GPS UART 2 DEBUG UART 1 Remote control signal input protocol PPM/SBUS/DSM/DSM2 RSSI input PWM or 3.3 analog voltage I2C 1 CAN 1 ADC input 6.6V X1 PWM output 6 PWM IO Support model Copter/Plane/Helicopter/VTOL/unmanned vehicle/Rover, etc. Working environment and physical parameters Operating Voltage 4.5 ~ 5.5 V USB Input voltage 5.0 V +- 0.25v Servo input voltage 4.8~5.4V Operating temperature -20 ~ 60°c size&weight Size 57*34*17mm Weight 40g Material download /V5+飞flight controller V5 nano manual Weight 1 kg Dimensions 30 × 20 × 10 cm Options V5 Nano FC