Messermeister Hardware Mod Kit for Custom Series Handles Elevate your knife's style and functionality with the Messermeister Hardware Mod Kit, exclusively designed for their Custom Series Handles. This kit includes all the hardware you need to swap out stock rivets with three stylish color options: Black, Silver, and Copper. Whether you're personalizing your knife or replacing old hardware, this kit makes customization effortless. Key Features: Includes 2 T8 Torx Tool Heads for easy assembly and disassembly. Comes with the following hardware: 3 Copper Torx Rivets 2 Copper Washers 3 Black Torx Rivets 2 Black Washers 3 Silver Torx Rivets 2 Brass Washers Please note: Colored handle scales are sold separately. Custom Handle & Rivet Replacement Instructions Important Safety Warnings: Sharp knives can cause serious injury. Always handle with extreme caution. Knife modifications should only be performed by individuals aged 18 or older. Completely cover the knife’s blade before starting any work to ensure safety. A properly sized Element Knife Company Edge-Guard or a securely attached cardboard sheath is recommended. Avoid using electric tools to remove or fasten screws. Always use manual hand tools to prevent accidents. Tools You’ll Need: Edge-Guard or similar blade cover. Two manual multi-bit screwdrivers with 1/4-inch drive sockets. Optional: Bench vice with protective padding (wood or cardboard). Step-by-Step Instructions Removing the Existing Handle: Secure the blade safely using an Edge-Guard or clamp. Ensure the tip is pointed away from your body or others. Use a manual screwdriver fitted with a provided T8 Torx bit to loosen each screw on one side of the handle. If screws resist, use the second T8 Torx bit to hold the opposite-side screw head steady while turning. Once all screws are removed, separate the handle scales and rivet halves. If needed, gently pry collars from screw holes with a flathead screwdriver. Only pry from the bottom edge of the hole. Installing a New Handle: Insert the female half of a Torx Rivet through the front hole of one handle scale and the tang. Hold it in place with your finger. Align the opposite handle scale and gently insert the male half of the Torx screw. Turn counter-clockwise until threads align, then lightly tighten clockwise by hand. Repeat the process for the remaining rivets, adding metal collars to the center rivet as needed. Use the T8 Torx bits to fully tighten each rivet manually. Avoid over-tightening to prevent stripping. For technical support or additional assistance, contact Messermeister Customer Service at 800.426.5134.
Related
Related
Related
Related