Direct to Film Transfer, or DTF, is a new technology that allows us to print your custom designs onto special film. These films are then transferred by you onto a garment of choice. These garments can be ANY color and ANY material. Similar to most heat transfer processes, a quality heat press is necessary for maximizing the best results. These DTF Transfers will be applied at 302 for 10-15 seconds and COOL PEELED. Cover with teflon or parchment paper and repress for 10 seconds. The measurements for designs will not exceed the width. Please note that the TAT is stated for 2-10 business days however, we do our best for a faster TAT. Color Disclaimer: Actual colors may vary. This is due to the fact that every computer monitor has a different capability to display colors and that everyone sees these colors differently. Please understand the actual color may vary slightly from your monitor. We cannot guarantee that the color you see accurately portrays the true color of the transfer but we strive to match as close as possible. Quality - Please check the resolution of your file before placing your order. Again, your file will be printed as it is received. 300 dpi is the suggested minimum. UV DTF STICKER Need Help with Measurements? Here are the standard sizes for the items listed: 🥤 16 oz UV DTF Wrap: 9.6 x 4.3 inches 🥤 20 oz Skinny UV DTF Wrap: 9.3 x 8.2 inches 🥤 24 oz UV DTF Wrap: 10.9 x 6.2 inches UV DTF stickers are for hard surfaces NO HEAT IS NECESSARY CARE INSTRUCTIONS Hand wash your items no dishwasher to ensure longevity. 🚨 Please Note: Cup sizes can vary by brand. Please measure to ensure the right sizing needed. 📦 All sales are final. We do not offer refunds or exchanges. ABI Designs is not responsible for application errors or sizing issues. That said, we’re always happy to help troubleshoot and work with you to avoid issues on future orders! Please note that the TAT is stated for 2-5 business days however, we do our best for a faster TAT. Color Disclaimer: Actual colors may vary. Every monitor displays colors differently, and lighting or screen settings can affect how a color appears. Because of this, we can’t guarantee that the color you see on your screen will perfectly match the final printed transfer though we always strive to get as close as possible. Quality Note: Please be sure to check the resolution of your file before placing an order. Files are printed exactly as received. For the best results, we recommend a resolution of at least 300 DPI. UV DTF- USE A SQUEEGEE or CARD WHEN APPLYING UV DTF. 1.BEFORE YOU PEEL APART RUB OR SQUEEGEE THE DESIGN TO ENSURE THE DESIGN GRABS TO THE CLEAR FILM. 2.PULL THE CLEAR TRANSFER AWAY FROM THE WHITE BACKING ENSURING THAT THE DESIGN HAS STUCK TO THE CLEAR FILM 3.SLOWLY APPLY THE DESIGN TO YOUR SUBSTRATE. USE A SQUEEGEE,YOUR HAND,OR A CARD TO RUB AGAINST THE DESIGN. 4.SLOWLY PEEL THE CLEAR FILM OFF OF THE DESIGN. DO NOT PLACE YOUR CUPS IN THE DISHWASHER. ITEMS SHOULD BE HAND WASHED AND NOT SOAKED IN THE SINK.
