CWB Complete Simulated Process Plastisol Ink Sets is the complete Cotton White Base simulated-process ink set for cotton, polyester and blends. It brings the full simulated-process system together so you can print detailed, multi-color artwork on dark garments over a white underbase with bright color and a controlled hand. CPSIA-compliant and phthalate-free, made in Hackensack, New Jersey. Complete simulated-process set. Pint, quart, gallon and 5 gallon. Heat cure. Made in the USA. Always run a test print first. Before any production run, print and fully cure a test on your exact garment and check opacity, hand and wash-fastness. It's the best habit in the shop — if you're not sure on settings, call us at 877-937-6400 before you run the job. What it prints on Cotton Polyester Cotton/poly blends Dark garments (printed over a white underbase) Printing & curing Mesh: fine mesh (200–355) to hold halftone dots and fine detail for simulated-process work on darks Squeegee: 65, 75 or 80 durometer — or a 70/90/70 triple durometer for sharp edges with easy fill Flash: 240–260°F between colors Cure: bring the full ink film to 330°F — always confirm with a temp gun or donut probe, not dryer air temp Recommended companion products Nylon Bond 289 Additive — mix into this ink to bond prints to nylon and other slick synthetics (catalyst; stir in a small amount, limited pot life, always test first). Quick Flash Reducer — thins the ink for easier printing and finer detail without killing opacity. Soft Hand Base — add for a softer, lighter hand feel on the garment. Badass Puff Additive — mix in for a raised, high-rise puff effect. UMX® Custom Color Match — send us your target color reference and we custom-mix the color for you (plastisol, solvent, UV & water-base). Cleanup: OPTI Wash 125 (odor-free screen & tool wash) and OPTI Spot 303 (spot cleaning). Custom color matching Match any target color with our UMX® (Ultimate Mixing System) — verified under D50 lighting, standard turnaround 48–72 hours. Free software at umxsystem.com. Safety, PPE & storage Wear nitrile gloves and safety glasses; avoid prolonged skin contact with uncured ink. Print with adequate ventilation; curing releases vapors — vent your dryer. Always stir the ink before use — standard practice to re-blend any settling. Storage & shelf life: keep sealed and out of direct sunlight. Shelf life is 1–2 years for standard inks; low-cure and all-polyester inks must be stored at 60–80°F. In high heat expect some expansion in the container — open carefully. Do not freeze. Uncured ink is not hazardous waste but should be handled and disposed of per local regulations. Refer to the Safety Data Sheet before use. Compliance CPSIA compliant — meets 16 CFR Part 1303 (
