Cytron Argon EON 4-Bay Network Storage Case Offers a 4 - Bay SATA NAS enclosure Designed to work with a Raspberry Pi 4 Model B board (Not included) Powered by the most versatile single-board computer Comes with a programmable OLED Display Features 4-Bay SATA Hard Drive ports Built-in Real-time Clock The Cytron Argon EON 4-Bay Network Storage Case is a 4 - Bay SATA NAS Enclosure, powered by the most versatile single-board computer. By the very nature and essence of the Raspberry Pi, the Argon EON is a Build Your Own Network Attached Storage (BYO-NAS). Argon 40 is again taking a daring step to uncharted territory and offers the Raspberry Pi community a more technically sophisticated accessory for daily computing needs: a Build Your Own Network Attached Storage (BYO-NAS). The cyberpunk-inspired design of the Argon EON made no compromises when it comes to both form and function. The space-grade aluminum allowed us to play around with ultra-modern and angular forms without compromising the rigidity and structural stability of the enclosure. The Argon EON also took advantage of the natural heat conductivity and dissipation of the aluminum to augment the built-in controllable fan to cool down both the Raspberry Pi and hard disks even at heavy loads. The programmable OLED Display is neatly situated under the multi-function power button to allow for seamless integration with the case. The OLED can display the Pi-NAS IP address, CPU status, and other functions needed for the operations. At the heart of the Argon EON are its 4-Bay SATA Hard Drive ports that will fit two (2) 3.5” SATA HDD and two (2) 2.5” SATA HDD/SSD. The maximum capacity of each HDD bay is 10 TB 18 TB for a total of 40 TB 72 TB capacity. Even though it can support up to 72TB (theoretically), it is managed by a USB 3.0 port, so if you really need a huge capacity NAS, it's recommended to get a good ready NAS with PCIe Bus. The GPIO is one of the best features of the Raspberry Pi, so there should always be access to this very useful and customizable yet simple interface. Because this Argon EON can support up to 4 hard drives, it is upgraded with a 12 volts 5 Amps Power Supply. Note: The Coin Cell needed for RTC is either CR1220 or CR1225. The coin cell battery is NOT INCLUDED in the original packaging
