The D-Box® plays a critical role in the camera's power system by acting as both a power distribution hub and a hot swap for other powered accessories. Its primary function is to supply power to the camera to ensure continuous operation throughout filming. In addition, it distributes power to other connected accessories, serving as the central power management point for the entire camera setup. The D-Box has two P-Tap ports, a DC-IN port for power supplies and hot swapping, an EXT port to distribute power and trigger communication, and a Remote Port that translates trigger information into the D-Box. The DC-IN port allows hot-swapping of the on-board battery without powering down the camera or attached accessories with a green LED indicator confirming that the port is active. The 5-Pin EXT port distributes trigger signals and power to the Power Strip (sold separately). The D-Box also features an eject button for quick battery swaps and a blue LED indicator that lights up when power is drawn from that source. The D-Box has a built-in electronic fuse that prevents overcurrent to accessories, allowing uninterrupted power to the camera. A red LED indicator illuminates if the electronic fuse is triggered. For camera control, the D-Box includes a Remote Port that accepts a TRS cable, which carries Run/Stop signals from the camera to the D-Box and then passes them through the 5-Pin EXT port to the Power Strip. Finally, the D-Box is designed with two screw-in points on its underside, allowing for direct attachment of our support bracket for secure and stable integration into the camera rig using our Riser Plate. Note: Remote port on D-Box for future FUJIFILM ETERNA GFX 55 Firmware Update Specifications:D-Box® for FUJIFILM GFX ETERNA 55 55 V-Mount: Weight: 277.6 g (0.61 lbs) | Dimensions: 78.3 x 39 x 105.2 mm (3.08 × 1.54 × 4.14 in)D-Box® for FUJIFILM GFX ETERNA 55 55 Gold Mount: Weight: 293.3 g (0.65 lbs) | Gold Mount: 74 x 47.5 x 99.4 mm (2.91 × 1.87 × 3.91 in)
