A single G5 actuator, for adding one or replacing one One D-BOX G5 haptic motion actuator on its own. This is the part you buy to take a three actuator rig to four, to extend a system with a Haptic Expander, or to replace a unit. It carries the same specification as every actuator in a G5 system: 114kg lifting capacity, a 38.1mm stroke at up to 100mm per second, and a 0 to 100Hz frequency range with a voltage switch for 230V mains. Our motion simulators range covers the complete systems. Key features 114kg lifting capacity 38.1mm stroke at up to 100mm per second Frequency range from 0 to 100Hz Acceleration to plus or minus 1g RJ45 connection to the Haptic Bridge Voltage switch for 120V or 230V Integrated controller, no separate box FIA licensed haptic technology What it does not include This is the actuator alone. There is no Haptic Bridge in the box, and no mounting bracket or bracket hardware, because this part exists to join a system that already has both. If you are starting from nothing rather than adding to an existing rig, the G5 3250i and G5 4250i systems include the bridge and the brackets. If you have a system and need the mount, the G5 actuator mounting bracket is the part. Where a fourth actuator goes On a three actuator rig the single rear unit moves the whole back together. Adding a fourth splits that, so each rear corner moves independently and the rig rolls at both ends rather than just the front. The Haptic Bridge already drives up to four, so nothing else changes on the control side. Beyond four, a Haptic Expander takes the system to seven actuators and up to six degrees of freedom. Our expert take "Going from three actuators to four is the one motion upgrade that is genuinely incremental. You are not replacing anything and you are not reconfiguring the software, you are adding a corner. Worth knowing the bracket is separate on a profile rig, because that catches people out when the actuator arrives and there is nothing to bolt it to." - Blake Sterling, Founder & CEO, Gamer Gear Direct Frequently asked questions Does it come with a Haptic Bridge?No. The actuator is supplied on its own. It connects by RJ45 to a Haptic Bridge you already have, and one bridge drives up to four actuators.Is a mounting bracket included?No. On an aluminium profile rig you need a bracket and its hardware, which is a separate purchase. On a tube frame the actuator mounts to a motion platform base instead.Will it match my existing actuators?Yes, provided they are G5. Every G5 actuator shares the same 114kg capacity, 38.1mm stroke and 0 to 100Hz range, so a mixed age set behaves consistently.Can I run more than four?Not from the Haptic Bridge alone. A Haptic Expander extends the system to seven actuators and up to six degrees of freedom. .page_crafter_two_column_grid-iS4fhpdLdM { align-items: center; } .page_crafter_two_column_heading-iS4fhpdLdM { color: #000; text-align: center; font-size: null; color: #000 !important; } .page_crafter_grid_plain_text-iS4fhpdLdM { color: #000; font-size: ; text-align: left; color: #000 !important; } .page_crafter_grid_media-iS4fhpdLdM { height: null; width: null; } .page_crafter_grid_media_container-iS4fhpdLdM { order: 1; } .page_crafter_two_column_button-iS4fhpdLdM { background-color: #000; color: #fff; font-size: 16px; color: #fff !important; } #TWO_COLUMN_GRID-iS4fhpdLdM { margin-bottom: 10px; } #SPACER-0M1sbdXWpn { margin-bottom: 10px; } .page_crafter_whats_included_container-dE0VthWpP6 { background-color: #f4f4f4; } .page_crafter_whats_included_heading-dE0VthWpP6 { color: #000; text-align: center; font-size: null; color: #000 !important; } .page_crafter_whats_included_text-dE0VthWpP6 { color: #000; font-size: ; text-align: center; color: #000 !important; } .page_crafter_whats_included_column_1_text-dE0VthWpP6 { color: #000; font-size: ; text-align: left; color: #000 !important; } .page_crafter_whats_included_column_2_text-dE0VthWpP6 { color: #000; font-size: ; text-align: left; color: #000 !important; } #WHATS_INCLUDED-dE0VthWpP6 { margin-bottom: 10px; } #SPACER-orVWIRx5RL { margin-bottom: 10px; } .page_crafter_two_column_heading-idNDEasmKW { color: #000; text-align: center; font-size: null; color: #000 !important; } .page_crafter_grid_plain_text-idNDEasmKW { color: #000; font-size: ; text-align: left; color: #000 !important; } #TEXT_BLOCK-idNDEasmKW { margin-bottom: 10px; } #SPACER-tj6dKcoeB5 { margin-bottom: 10px; } .page_crafter_two_column_heading-ybzUqolVnH { color: #000; text-align: center; font-size: null; color: #000 !important; } .page_crafter_grid_plain_text-ybzUqolVnH { color: #000; font-size: ; text-align: left; color: #000 !important; } #TEXT_BLOCK-ybzUqolVnH { margin-bottom: 10px; } #SPACER-xjnESVn2VW { margin-bottom: 10px; } .page_crafter_two_column_heading-aYe3pNyTxw { color: #000; text-align: center; font-size: null; color: #000 !important; } .page_crafter_grid_plain_text-aYe3pNyTxw { color: #000; font-size: ; text-align: left; color: #000 !important; } #TEXT_BLOCK-aYe3pNyTxw { margin-bottom: 10px; } #SPACER-XNBzBcOSt6 { margin-bottom: 10px; } .page_crafter_heading-FghrpYYk3i { color: #000; text-align: center; font-size: null; color: #000 !important; } #HEADING-FghrpYYk3i { margin-bottom: 10px; } #ACCORDIAN-dDyilfQXj4 { margin-bottom: 10px; } @media (max-width: 798px) { #TWO_COLUMN_GRID-iS4fhpdLdM { } #SPACER-0M1sbdXWpn { } #WHATS_INCLUDED-dE0VthWpP6 { } #SPACER-orVWIRx5RL { } #TEXT_BLOCK-idNDEasmKW { } #SPACER-tj6dKcoeB5 { } #TEXT_BLOCK-ybzUqolVnH { } #SPACER-xjnESVn2VW { } #TEXT_BLOCK-aYe3pNyTxw { } #SPACER-XNBzBcOSt6 { } #HEADING-FghrpYYk3i { } #ACCORDIAN-dDyilfQXj4 { } } Specifications Type: Single D-BOX G5 haptic motion actuatorLifting capacity: 114kg (250lb)Maximum stroke: 38.1mm (1.5 inch)Maximum velocity: 100mm per secondMaximum acceleration: Plus or minus 1 g-forceFrequency range: 0 to 100HzHorizontal load: 3 times vertical lifting capacity on low friction surfacesConnection: RJ45 to the Haptic BridgePower at 230V: 150W average, 260VA, 1.1A peak for a single actuatorVoltage: Switchable 120V or 230VOperating temperature: 0 to 40 degrees CHaptic Bridge: Required, not includedMounting bracket: Not includedSoftware: D-BOX HaptiSync CenterPlatform: Windows PCWarranty: 2 years What's In The Box? 1 x D-BOX G5 haptic motion actuatorActuator mounting screws Reviews Warranty The D-BOX actuators and Haptic Bridge are covered by D-BOX's own 2-year limited manufacturer warranty against defects in materials and workmanship, beginning from the date of purchase. Normal wear and tear sits outside the warranty. Every product is 100% genuine, sourced through authorised distribution, and our Australian simulation team is only a call or email away. All products sold by Gamer Gear Direct are genuine and sourced from authorised distributors, with full Australian support.
![D-BOX G5 2250i Haptic System [1.5" Travel]](https://cdn.shopify.com/s/files/1/0457/1987/9831/files/DBOX-G5_actuator_set_of_2.2_0f5a309d-b21e-4f1b-96c8-d289fcc9d5bb.png?v=1745927128&width=480)
![D-BOX G5 4250i Haptic System [1.5" Travel]](https://cdn.shopify.com/s/files/1/0457/1987/9831/files/DBOX-G5_actuator_set_of_4.8_711c4701-a97b-497f-ba62-6ddaa9eaf45e.png?v=1745927136&width=480)
