The D-D Dual Temperature Controller is an ideal way to keep the temperature of your aquarium stable. Temperature is continuously monitored by way of a temperature probe connected to the unit and temperature is regulated by one of two sockets on the device. Socket 1: Controls a heater within a certain desired temperature range, if the temperature drops below the required range the heater will be activated to warm your aquarium.Socket 2: Controls a chiller or fans on your aquarium, should your temperature rise above a set point this socket will be activated turning on the chiller or fans to help cool your aquarium. Key FeaturesPlug and play - no wiring requiredHeating/cooling can be set to within 0.3 deg C of target temperature e.g. Control Range of 24.7 - 25.3 deg C (with set temp of 25 deg C).Audible and Visual Alarm Function e.g alarm sounds if temp below 24 deg C or above 26 deg C ( with alarm set to 1 deg C).2m long plastic coated temperature sensor with mounting suction cup.Heating Control (resistive load, such as heater) max 1600WCooling Control (inductive load, such as a chiller) max 600WDisplay: Back Lit blue LCD – permanently lit.Power off memory function SizeDisplay Panel size: 95mm x 50mm x 15mmControl socket size: 160mm x 70mm x 45mm Technical ParametersTemperature measuring range: -40 - 99 deg C Temperature differential setting range 0.3 – 16.0 deg CAlarm function range: 0.5 – 5 deg C of set point temperatureResolution: 0.1 deg CAccuracy: ±1 deg C (-30 - 50 deg C) Power supply: 220VAC±10%, 50/60Hz Operating Humidity range: 20% - 85%Power consumption: ≤3WOperating Temperature Range: - 10 – 60 deg C
