PHOENIX — Multi-Purpose Dressing Agent PHOENIX revives and protects plastics, rubber, vinyl, and tires with a clean, even finish and built-in UV protection to help resist fading and micro-cracking. Interior or exterior, it restores a rich OEM look in minutes. What PHOENIX Does Conditions and enhances trim and tires while forming a protective layer against sun and road stress, helping surfaces stay darker, richer, and easier to maintain. Why You Need PHOENIX UV defense to help prevent fading and micro-cracks. Multi-surface use on interior/exterior plastics, vinyl, rubber, and tires. Neutral pH (≈7–8) for surface friendliness and versatility. Quick, even finish — natural satin that won’t feel greasy when used as directed. Where to Use It Exterior trims, plastics, rubber seals Vinyl panels and exterior plastics Tires (clean & dry before dressing) Interior plastics/vinyl (light application) Directions Work on a clean, cool surface out of direct sun. Shake well. Apply to an applicator (foam or microfiber), not directly to the surface, then spread a thin, even coat. Allow a brief set time, then buff off excess with a clean edgeless microfiber for an even, non-greasy finish. Tires: after cleaning and drying, work PHOENIX into the sidewall. Let cure a few minutes and lightly buff to reduce sling. Layer as desired to adjust sheen. Reapply as needed after washes or harsh weather. Pro Tip: For ultra-even trim results, pre-clean with an APC, rinse, dry, then apply very thin. On tires, two light coats with a short flash between coats outlast one heavy coat. Compatibility & Care Always spot test on sensitive or textured plastics. Avoid over-application (can attract dust). Wipe away streaks promptly. Do not use on floors, pedals, or steering surfaces where slip is a concern. Pairs Well With Edgeless 420 GSM Microfiber Towels — final buff for a uniform satin look. Microfiber Tire Dressing Applicator — controlled tire sidewall application. Foam Hex Tire & Trim Applicator — precise work on trims and mouldings. Good to Know PHOENIX is formulated for regular maintenance: clean first, apply thin, and buff. Its neutral pH pairs well with gentle wash routines and won’t fight well-maintained coatings or sealants nearby. pH 7.0–8.0 neutral Flammable No Ease Medium + PRO Irritation Skin/Eye Gloves Recommended Interior Yes Exterior Yes Mobile Wash Friendly Yes
