D31016P Goulds Centripro Weatherproof Duplex Control Panel with Seal Fail and High Temp Circuit, 208/230/460/575 Volts, 10-16 Amp Range, 3 Phase, Indoor/Outdoor NEMA 4X Fiberglass Enclosure
Goulds Centripro D31016P, Weatherproof Duplex Control Panel with Seal Fail and High Temp Circuit, 208/230/460/575 Volts, 10-16 Amp Range, 3 Phase, Indoor/Outdoor NEMA 4X Fiberglass Enclosure Goulds Centripro SES Duplex Control Panel (3 Phase) This is a weatherproof, duplex control panel for providing fully automatic operation for two pumps. An Electrical Alternator is used on a duplex pump application where automatic electrical cycling of the pump is desired for added protection in residential or commercial applications. With one pump operating to handle normal flow, a second pump becomes operational in the event the water level continues to rise. Features Rugged NEMA 4X, fiberglass enclosure with gasketed, hinged door, stainless steel hardware, 30 watt, flashing red light, and 95db alarm horn withstands even the most severe weather conditions and prevents corrosionThree phase. Field adjustable for 208/230 /460/575V, 60 Hz115V control circuit transformer2 adjustable motor overload protectors. Heaters not requiredSolid state electronic pump alternator circuit displays float status for ease of installation and trouble shootingAlternator selector switch for maintenance on one or both pumpsAccepts single or dual power feed2 hand-off-automatic (H-O-A) pump switchesOn-off control circuit switch2 oversized magnetic contactorsNumbered terminal strip-screw typeLag pump start delay delays starting lag pump for 5 seconds if both pumps attempt to start simultaneously as after a power outageHinged door with lockable stainless steel latch for safe operation indoors or outHigh-level alarm circuit includes through-door mounted silence switch for manual silence of alarm hornThrough-door mounted alarm test switch insures proper operation of the alarm circuit without the need to open the panelTwo through-door mounted pump run lightsTop-mounted high intensity flashing red light provides 360° visibilityThis duplex control is factory wired for operation with three float bulbs. An easy field modification for four float bulb operation using separate “lag-on” and “alarm bulbs” is providedPanel can be wired for a single power feed for pumps and control circuit or the control circuit can be wired to a separate power supply to insure alarm integrity in case of a tripped main breakerAuxiliary alarm contacts provided for remote alarm connectionColor coded wiring, screw type terminals and plug in sockets, ensure ease of field servicingEntire unit is UL and CUL listedApplication SumpEffluentSewageWater transfer Note: Requires three float switches or optional fourth lag float (sold separately.) The type selected determines the quantity needed. The basin depth and panel location determine the required cord length. Please contact customer service for additional information.
Related
Related