-Dimension: 164x140x26mm (6.46x 5.51x10.2")-Weight: 352g-Input Voltage: 12 to 24 VDC ± 10%-Max. Input Current: 51.9A (550mA excluding reader and USB)-Operating Temperature: 0°C to 70°C (32°F to 158°F)-Relative Humidity: 5% to 85% Product Features OSDP Reader Support –Increase security and functionality with secure channel and bi-directionalcommunications Robust NetworkSecurity – Supports mutual authentication using TLS 1.2 while running in aFIPS140-2 approved operating environment on the intelligent controller IO Module Encryption– Enhance security between intelligent controller and IO modules with AESencryption Crypto Chips –Protect against malicious attacks to keep keys and passwords safe Threat Levels –Define up to 7 different threat levels that are used to instantaneously adjustuser access during lockdowns and lockouts High Amp Relays –Ensure controller protection from power hungry locks and enables wider choiceof egress hardware Open Architecture –Work with a variety of software partners over time without any re-investment inhardware Based on MercuryTechnology – Built on a tried and tested platform, operating in the most demandingaccess control enterprises for 25+ years End-to-End Security –TLS 1.2, AES-256, OSDP Secure Channel and 4-state supervised inputs ensures noweak technology link in the chain of security VertX Compatibility –Installs in the same footprint as VertX and communicates with V100, V200 andV300 IO Modules Product Specifications Credential Capacity: 250,000 Credential Number Size: Up to 64 bits with 15-digits PIN MAX Transaction Buffer: 50,000 Access levels: 32 per credentials (per reader schedule); plus custom credential override On-Board Access Point Control: Up to 2 access points with on-board IO On-Board Reader Support: Up to 4 (OSDP multi-drop) or 2 (Wiegand) with on-board IO Maximum Access Point: 64 (using X100 or V100 IO modules) Maximum Reader: 64 (ODSP or Wiegand, regardless of IO module configuration) Maximum Inputs: 615 (using X200 or V200 IO Modules) Maximum Outputs: 388 (using X200 or V200 IO Modules) Number of IO Modules Buses: 2 (each deliciated to either Delta or Delta VertX IO modules) Maximum X series IO Modules: 32, each IO Modules bus can support up to 32 X series modules Maximum VertX IO Modules: 32, each IO Modules bus can support up to16 VertX modules Micro USB Port: 5Vdc, 500mA maximum (USB 2.0) Memory and Clock Battery Backup: 3Volt Lithium, type CR2032 MicroSD Card Format: microSD or microSDHC 2GB to 8 GB (RFU) Ethernet communication: 10BaseT / 100Base-TX IO Module communication: 2-wire RS-485, 2400 to 115K BPS, asynchronous Inputs: 7 supervised / unsupervised, standard EOL: 1k/1kΩ1%. ¼ watt Outputs: 4 Relays, Form-C with dry contacts Normally Open Contact Rating: 5A@30 Vdc resistive Normally Closed Contact Rating: 3A @30 Vdc resistive Reader Power: 12Vdc± 10% regulated, 500mA maximum each reader Data Input Power: TTL compatible or 2-wire RS-485 OSDP Mode: 9,600 to 230,400bps, asynchronous , half duplex, max. cable 2000ft (609.6m) LED Output (Wiegand): Open Collector, 12Vdc open circuit maximum, 40mA sink maximum Beeper Output (Wiegand): Open Collector, 12Vdc open circuit maximum, 40mA sink maximum SIN Railing Mounting: Purchase accessory separately Manufacturer: Phoenix Contact, Description: USA 10 Series Rail Adapter, Mfg Part No. 1201578 Certifications Certification: FCC Part15 Subpart B, CE, BSMI, IC, AS, NZS, TCVN, KCC Safety: UL-294, IEC 62368-2. CB Scheme Hazardous Substances: RoHs (2011/65/EI & 2015/863), EU REACH (1907.2006), California Proposition 65 ECCN: EAR99
