The Dai-ichiseiko Picker Tool is a multi-picking tool provided with a worm grip, jig eye line-through hole, and line cutter makes it possible to set the Triple Eight Knot and the 3.5 Knot with ease and quickly. Size: 106 × 23 × 15 mmWeight: 19 gColour: Dark Earth / BlackAccessory: Preliminary JIG EYE Line Pickerx1 and dedicated driver x 1 MADE IN JAPAN ● Triple Eight Knot 1) Close the tip of each picker and pass it through a ring of approximately 1 cm made by overlapping the line and leader line. 2) Open the tip in the ring and make three turns. 3) After that, pinch the line and the leader line to pass through the ring. 4) Tighten the lines slowly, further tighten the line and the leader line, and cut the redundant lines. (When tightening, wet the line with saliva) ● 3.5 Knot 1) Pass the tip of the pickers through a ring made by overlapping the line and leader line. 2) Pinch and pull out the two lines. Repeat step 2) three times. (Easier if the overlapping part re-grabbed each time) 3) Extract only the line once more. 4) Tighten the lines slowly, further tighten the line and the leader line, and cut the redundant lines. (When tightening, wet the line with saliva)
