Equipped with DAIWA’s latest technology, AIRDRIVE DESIGN. Evolution of LT and REAL FOUR, providing ULTIMATE CONTROL. “AIRDRIVE DESIGN” is the next generation of spinning reel design concept. The 24CERTATE implements this cutting-edge technology in the front unit, providing anglers with the superior operability with maximum power and rigidity. This landmark evolution has two major implications for the history of CERTATE.One is the culmination of the LT concept, reached with the MONOCOQUE BODY. The other is the REAL FOUR concept that has been carried on from the first CERTATE which revolutionised spinning reels in 2004.The REAL CONTROL was the last piece that needed innovative evolution, this has now been achieved with the 24CERTATE through the innovative technology of AIRDRIVE DESIGN. Full metal (AL) MONOCOQUE BODY, a symbol of STRENGTH. The pursuit of power, rigidity, and durability never stops. Full metal MONOCOQUE BODY made of aluminum symbolizes the strength that no other reels can provide. An identity that has earned CERTATE the trust of a wide range of anglers over the years. The desire to be strong and tough wherever possible made 24CERTATE even stronger. Special surface treatment has been added to increase hardness of the drive gear and water resistance has been improved on the handle side, in addition, the drags and pinions of some of the larger models are reinforced to SALTIGA-equivalent specifications.CERTATE is always a tough spinning reel that can be used for many years to come. The quality and strength of the product is the proof of its reliability, which has been widely used across the globe regardless of the target. Front Unit Technology AIRDRIVE SPOOL Effortless Rotation. In order to complete the design concept of AIRDRIVE DESIGN, weight reduction of the spool was essential.In addition, the AIRDRIVE SPOOL is equipped with a newly developed drag sound mechanism. The new structure is separate from the spool body to reduce weight, while at the same time, it has been modified to have less frictional resistance so as not to interfere with the drag release. AIRDRIVE BAIL Precise line flow The AIRDRIVE BAIL is the next evolution of AIR BAIL. In order to further reduce the inertia of the rotor unit, which has been completely redesigned with the AIRDRIVE DESIGN, reducing weight of the bail was the next step. To enhance its position for power & strength, and to support the reduced weight of the rotor and maintain the sensitivity, 24CERTATE is equipped with Φ2.4mm bail. AIRDRIVE ROTOR Effortless rotation Smooth winding and precise stop. Anglers can wind and stop the reel with perfect timing. Low rotation inertia of the spherical rotor brings the feel of lightness when winding. The operability and winding sensitivity have been dramatically improved. AIRDRIVE ROTOR will bring the lure fishing scene to the next level. AIRDRIVE SHAFT Low friction oscillation. AIRDRIVE SHAFT creates the feel of smooth, quiet rotation and provides anglers with enhanced torque and power. In addition to this, both ends of pinion gear are now supported with bearings to transmit the crank power from the handle to the rotor with a higher level of efficiency. By adding high quality collars to the mainshaft, rotational noise has been reduced significantly. ROTOR Strength test: It proves the new AIRDRIVE ROTOR has an equal amount of strength in comparison to 19CERTATE. Changes to the shape and thickness from the 19CERTATE Rotor have also managed to reduce the weight but allowed strengthening to areas where a significant amount of force is applied. ATD TYPE-L Smooth and Powerful The ATD TYPE-L drag system works smoothly in response to the pull of a fish. But the initial response of the drag has been further improved, especially when using lighter lines to further reduce the load on the line and enable quicker catch without causing too much stress to the fish. *LT5000D-CXH, LT5000D, and LT5000D-XH have carbon washers + ATD. LONG CAST-ABS Greater distance Friction caused by line contact with the spool edge during casting has been reduced. The two-stage spool edge shape is engineered for smooth line release. The spool edge is designed to be best suited for long casts with the maximum amount of line spooled. Distance is increased by approximately 5% compared to models without the LONG CAST-ABS. TWISTBUSTER III Twist prevention. TWIST BUSTER is a mechanism for eliminating line twisting, a major cause of line problems. The new TWIST BUSTER III uses a gap in the line roller section to suppress the fluttering of the line as it passes through the line roller. The line roller section is also equipped with MAGSEALED. This new design realises reliable rotation performance over a long period of time, unaffected by salt water. Body Unit Technology Monocoque Body Desgin vs Traditional Body Design MONOCOQUE BODY DESIGN The MONOCOQUE BODY is covered by an engine plate, which itself serves as a huge screw, and provides stronger housing and prevents deflection under heavy loads. Getting rid of screw holes also allows for a much larger space inside the body than in the traditional structure, making it possible to load a more powerful, larger-diameter drive gear. TRADITIONAL BODY DESIGN The body cover is fastened to the body with three or four screws. When the body is subjected to heavy loads, the power concentrates on these thin screws, so the body and body cover are prone to bending under heavy loads. In addition, the screw holes reduce the internal space, which naturally reduces the size of the drive gear that can be installed into the body. MONOCOQUE BODY Rigid one piece body (AL) The MONOCOQUE BODY is incredibly tough, and produces stable rotation. By introducing MONOCOQUE (MQ) construction the internal body space has been increased to allow larger drive gear to be installed. MQ construction also allows the engine plate to replace the need for screws to stabilise the drive gear. MQ concept improves support of the internal parts and adds durability and resistance to intrusion. (AL-Aluminium) TOUGH DIGIGEAR 24CERTATE is equipped with a TOUGH DIGIGEAR made from duralumin. The rigid material is cold-forged and machine-cut to high precision to achieve the ideal tooth shape. In addition, special surface treatment is applied to minimise damage to the gears caused by high loads. Furthermore, the 3000-5000 size reels with an XH ratio are equipped with a high-strength pinion that has a proven track record with SALTIGA. MAGSEALED Performance preserved MAGSEALED is a technology that implements a special liquid material developed originally for aerospace engineering. MAGSEALED is used to create a water and dust-resistant barrier in lieu of traditional rubber seals.The ultimate focus of MAGSEALED was to protect the gearing inside the reel body and the bearings. Two of the key components to protect if overall performance is to be preserved. MAGSEALED LINE ROLLER Prolonged durability. The line roller section is often vulnerable to water, so MAGSEALED is also equipped to prolong the life of the CRBB line roller bearing. It does not stick, works reliably and for a long time, greatly reducing line problems caused by line twisting. (*FC models are not equipped with this feature to ensure absolute free flowing line in finesse situations.) Specifications MODEL BALL BEARING DRAG GEAR LINE CAPACITY WEIGHT 24 CERTATE FC LT 2000S-P 10CRBB; 1RB 5kg 4.9 (64cm) PE# 0.4/200m 170g 24 CERTATE FC LT 2500S 10CRBB; 1RB 5kg 5.1 (72cm) PE# 0.6/200m 175g 24 CERTATE (G) FC LT 2000-P 10CRBB; 1RB 5kg 4.9 (64cm) PE# 0.6/200m 170g 24 CERTATE (G) FC LT 2500 10CRBB; 1RB 5kg 5.1 (72cm) PE# 0.8/200m 175g 24 CERTATE (G) FC LT 2500-XH 10CRBB; 1RB 5kg 6.2 (87cm) PE# 0.8/200m 175g 24 CERTATE (G) LT 2500D 10CRBB; 1RB 10kg 5.2 (73cm) PE# 1.2/300m 205g 24 CERTATE (G) LT 3000D-CH 10CRBB; 1RB 10kg 5.7 (85cm) PE# 1.5/300m 205g 24 CERTATE (G) LT 3000D 10CRBB; 1RB 10kg 5.2 (77cm) PE# 1.5/300m 225g 24 CERTATE (G) LT 3000D-XH 10CRBB; 1RB 10kg 6.2 (93cm) PE# 1.5/300m 225g 24 CERTATE (G) LT 4000D-C-ARK 10CRBB; 1RB 12kg 5.2 (82cm) PE# 2/300m 255g 24 CERTATE (G) LT 4000D-CXH-ARK 10CRBB; 1RB 12kg 6.2 (99cm) PE# 2/300m 255g 24 CERTATE (G) LT 5000D-ARK 10CRBB; 1RB 12kg 5.2 (87cm) PE# 2.5/300m 305g 24 CERTATE (G) LT 5000D-XH-ARK 10CRBB; 1RB 12kg 6.2 (105cm) PE# 2.5/300m 305g
Related
Related
Related
Related