Dali Opticon 8 Mk2 Floorstanding Speakers (Pair)

Vinyl Sound Canada Inc. Verified independent store

→

DALI Opticon 8 MK2 Floorstanding Speakers at Vinyl Sound Toronto Canada The Opticon 8 MK2 is a flagship three-way floorstanding speaker from DALI (Hobro, Denmark), available at Vin yl Sound in Toronto, Canada. Sitting at the top of the OPTICON MK2 series, it is engineered for large listening spaces that demand genuine low-frequency authority, wide dynamic range, and refined high-frequency resolution. Its dual 8" wood fibre woofers reach down to 38 Hz, while the patented SMC magnet system and signature hybrid tweeter module deliver a frequency range extending to 30,000 Hz. Assembled by hand at DALI's production facility in central Denmark, each stereo pair is built and tested by a single technician using components from the same production batch to ensure precise acoustic and visual matching. Hybrid Tweeter: Dome Precision Meets Ribbon Finesse The OPTICON 8 MK2's most distinctive feature is its hybrid tweeter module, a design pioneered by DALI and refined through years of development. A 29 mm soft dome tweeter is paired with a custom 17 x 45 mm planar ribbon element, both mounted on a cast aluminium faceplate derived from DALI's higher-tier Callisto active series. The dome handles frequencies from the crossover point upward with speed and dynamic impact, while the ribbon element is configured to gradually take over above 10 kHz, delivering exceptional air and finesse in the uppermost octaves. The aluminium faceplate incorporates precision dispersion control detailing, ensuring smooth and consistent off-axis performance throughout the listening room. Patented SMC Magnet Technology Every driver in the OPTICON 8 MK2 benefits from DALI's patented SMC (Soft Magnetic Composite) magnet motor system. The pole piece inside each driver's large ferrite ring magnet is manufactured entirely from SMC, a coated granular material that combines very high magnetic permeability with very low electrical conductivity. This unique combination significantly reduces magnetic hysteresis and eddy currents, resulting in a dramatic reduction in third-order harmonic distortion. The audible benefit is a relaxed, effortless midrange character and a surprisingly high level of low-level detail retrieval, even at extended listening sessions. Aerodynamic Dual-Flare Reflex Port The OPTICON 8 MK2 uses a bass reflex loading system to extend low-frequency bandwidth and increase power handling beyond what a sealed enclosure of comparable size could achieve. DALI's dual-flare port geometry is shaped to minimise air turbulence at both the entry and exit points, bringing port design principles closer to those used in aerodynamics. The result is a tuning frequency of 29.5 Hz, deeper low-frequency extension, and a reduction in the port noise and chuffing that can compromise dynamic impact at higher playback levels. Wood Fibre Drivers and Rigid Cabinet Construction The two 8" bass drivers and the dedicated 6.5" midrange driver all use cones made from a paper pulp and wood fibre composite. This material is selected for its combination of low mass, high internal damping, and resistance to break-up resonances, all of which contribute to a coherent, low-colouration presentation across the midrange and bass. The speaker enclosure features a 25 mm thick front baffle and additional internal bracing panels that virtually eliminate cabinet panel resonance, ensuring that only the drivers contribute to the sound. Key Features Hybrid Tweeter Module: Combines a 29 mm soft dome with a 17 x 45 mm planar ribbon element on a cast aluminium faceplate for wide dispersion and smooth high-frequency extension to 30 kHz. Patented SMC Magnet System: Soft Magnetic Composite pole pieces significantly reduce hysteresis and eddy current distortion, lowering third-order harmonic distortion across the driver range. Dual 8" Wood Fibre Woofers: Paper pulp and wood fibre cone construction delivers precise, low-colouration bass with minimal break-up resonance, reaching down to 38 Hz. Dedicated 6.5" Midrange Driver: A separate midrange driver handles the critical vocal and instrumental range, maintaining clarity and separation independently of the bass system. Aerodynamic Dual-Flare Reflex Ports: Turbulence-minimising port geometry extends bass bandwidth and power handling while reducing port noise at high output levels. Four-Way Crossover at 380 / 2,200 / 14,000 Hz: A carefully optimised, simplified-topology crossover with upgraded components improves detail, precision, and inter-driver coherence compared to the MK1. 25 mm Thick Front Baffle with Internal Bracing: Extremely rigid enclosure construction virtually eliminates panel resonance, keeping the cabinet acoustically inert. Hand-Assembled Stereo Pairs: Each pair is built and tested by a single technician at DALI's Danish factory using components from the same production batch for guaranteed acoustic and visual matching. Bi-Wire Capable with Gold-Plated Terminals: Gold-plated connection terminals support bi-wiring for amplifier pairing flexibility. Available in Multiple Finishes: Offered in Black Ash and Tobacco Oak finishes to suit a range of listening room aesthetics. Technical Specifications Frequency Range (+/- 3 dB) 38 Hz - 30,000 Hz Sensitivity (2.83V / 1m) 88.5 dB Nominal Impedance 4 Ohms Maximum SPL 112 dB Recommended Amplifier Power 40 - 300 W Crossover Frequencies 380 Hz / 2,200 Hz / 14,000 Hz High Frequency Driver 1 x 29 mm soft dome, 1 x 17 x 45 mm ribbon Midrange Driver 1 x 6.5" Bass Drivers 2 x 8" Bass Reflex Tuning Frequency 29.5 Hz Dimensions (H x W x D) 44.9" x 9.5" x 18.1" (1141 mm x 241 mm x 450 mm) Weight (Each) 81.8 lbs (37.1 kg) Enclosure Type Bass Reflex Finish Options Black Ash, Tobacco Oak Country of Manufacture Denmark Frequently Asked Questions What is the DALI Opticon 8 MK2? The DALI Opticon 8 MK2 is the flagship floorstanding speaker in DALI's OPTICON MK2 series, manufactured in Hobro, Denmark. It is a three-and-a-half-way design featuring dual 8" woofers, a dedicated 6.5" midrange driver, and a hybrid tweeter module combining a 29 mm soft dome and a 17 x 45 mm ribbon element. With a frequency range of 38 Hz to 30,000 Hz, 88.5 dB sensitivity, and a recommended amplifier power of 40 to 300 watts, it is designed to deliver full-range, high-resolution sound in large listening rooms. How does the DALI Opticon 8 MK2 compare to the DALI Oberon 9 and Rubicon 8? The DALI Opticon 8 MK2 sits above the Oberon 9 and below the Rubicon 8 in DALI's product hierarchy. Compared to the Oberon 9, the Opticon 8 MK2 adds the hybrid tweeter module with its ribbon element, a dedicated midrange driver for a true three-way design, and the patented SMC magnet system, resulting in a more detailed and refined high-frequency presentation. The Rubicon 8 and Rubikore series step further with upgraded SMC-KORE inductors and more advanced cabinetry, but the Opticon 8 MK2 delivers the core DALI sonic signature, including the hybrid tweeter and SMC technology, at a more accessible level within the range. Can the DALI Opticon 8 MK2 fill a large room? Yes, the DALI Opticon 8 MK2 is specifically engineered for large listening spaces. Its dual 8" woofers, bass reflex tuning at 29.5 Hz, and maximum SPL of 112 dB provide the low-frequency bandwidth and dynamic headroom needed to fill larger rooms with ease. A recommended amplifier range of 40 to 300 watts also means it scales well from modest integrated amplifiers to high-powered separates, giving it flexibility for a wide range of room sizes and system configurations. What is DALI's SMC (Soft Magnetic Composite) technology? SMC, or Soft Magnetic Composite, is a patented DALI magnet motor material used in the pole piece of each driver's magnet system. It is a coated granular compound that combines very high magnetic permeability with very low electrical conductivity. This unusual combination reduces magnetic hysteresis and eddy currents inside the motor, which are major sources of non-linear distortion in conventional driver designs. The practical result is a significant reduction in third-order harmonic distortion, producing a more relaxed midrange, greater low-level detail, and less listening fatigue over extended sessions. Where can I buy the DALI Opticon 8 MK2 in Toronto or Canada? The DALI Opticon 8 MK2 is available at Vinyl Sound, an authorised DALI dealer located in Toronto, Canada. Vinyl Sound carries the full DALI speaker range and can assist with product demonstrations, system matching advice, and Canadian delivery. Purchasing from an authorised Canadian dealer ensures full manufacturer warranty coverage and access to local after-sales support. What amplifier should I pair with the DALI Opticon 8 MK2? The DALI Opticon 8 MK2 works with a wide range of amplifiers rated between 40 and 300 watts into a 4-ohm load. Its 88.5 dB sensitivity means it does not require an exceptionally powerful amplifier to reach comfortable listening levels, but it responds well to higher-quality amplification. Integrated amplifiers and stereo receivers from brands such as NAD, Rotel, Arcam, and Hegel in the 80 to 200 watt per channel range are a natural match, while the speaker also pairs well with separate pre and power amplifier combinations for more ambitious systems. Does the DALI Opticon 8 MK2 support bi-wiring? Yes, the DALI Opticon 8 MK2 supports bi-wiring via its dual sets of gold-plated binding posts on the rear panel. Bi-wiring allows separate speaker cable runs to the low-frequency and high-frequency sections of the crossover, which some listeners and system configurations benefit from in terms of reduced interaction between bass and treble signal paths. Standard single-wiring with the provided shorting links is fully supported and performs excellently without a bi-wire setup. How should the DALI Opticon 8 MK2 be positioned in a listening room? DALI recommends positioning the Opticon 8 MK2 facing straight ahead without toe-in, due to the wide dispersion characteristics of the hybrid tweeter module. The speakers perform best with some distance from the rear wall to allow the bass reflex port to breathe freely, and a listening position that forms a natural equilateral triangle with the speakers is ideal. The cast aluminium faceplate on the hybrid tweeter incorporates dispersion control detailing that ensures consistent off-axis performance, giving the speakers more placement flexibility than designs with narrower high-frequency dispersion. Show more