Dali Phantom E-50 In-Ceiling Speakers (Pair) The DALI PHANTOM E-50 in-ceiling speaker delivers an incredible clear and well-defined audio experience, and impresses with the level of bass it can produce, despite its size. The E-50 is equipped with a 5.25" woofer and designed for optimum in-ceiling use, but can also be mounted in-wall. EASY INSTALLATION The dogleg mounting system makes the install process an easy one-step action simply by tightning the dedicated screws to swing out the dogleg brackets. INVISIBLE DESIGN The very thin magnetic front grilles integrates almost seamlessly into any home environment. FLEXIBILITY IN FUNCTION The PHANTOM E-series are easy to place anywhere in any room, and will even work perfectly off-axis in challenging situations and environments due to two audio settings used for adjusting the performance of the speaker. WIDE DISPERSION All speakers by DALI are designed around the principle of wide dispersion. This entails an off-axis optimisation of the audio reproduction. The technology is perfect for use in install speakers, since they are always mounted flush against either a wall or ceiling. WOOFER Flexibility was important when designing the PHANTOM E-50, and the ability to use the speaker in areas not fit for traditional DALI speakers was a large part of this. To ensure the best balance between durability and great audio reproduction polypropylene was chosen for the cone material. The woofer is tilted and angled for improved directionality and sound staging. The cone, surround and magnet motor system is designed according to the DALI low-loss principles. This makes the PHANTOM E-50 an easy speaker to drive, and even smaller amplifiers will be able to deliver a high quality audio experience with the PHANTOM E-50. TWEETER The 25mm soft dome tweeter module in the PHANTOM E-50 is fixed over the woofer in a composite housing mounted on an airplane-wingprofile wishbone bracket. By mounting the tweeter over the woofer the total foot print of the speaker is keep at a minimum. The aerodynamic design of the wing and the slightly of centre placement of the tweeter help eliminate the “coaxial colouration” normally associated with coaxial drivers. The positioning also help the mid-range and low frequencies blend gracefully with high frequencies for a precise and natural overall performance even at high sound pressures. The compass rose on the outer edge help direct the speaker for optimum sound stage. Specification Frequency Range (+/-3 dB) [Hz] 58 - 25,000 Sensitivity (2,83 V/1 m) [dB] 87 Nominal Impedance [ohms] 8 Maximum SPL [dB] 104 Recommended Amplifier Power [W] 40 - 120 Crossover Frequency [Hz] 3,600 High frequency driver, Quantity 1 x 28 mm High frequency driver, Diaphragm type Soft Textile Dome Low frequency driver, Quantity 1 x 5,25" Low frequency driver, Diaphragm type Polypropylene Cone Enclosure type Open back Recommended Working Volume 5 - 35 L Connection Input Single Wire Recommended Placement In-Wall In-Ceiling Functions Focus / Distributed Normal / HF + Tilt Dimensions (ØxD) [mm] 230 x 99 Cut-Out Dimensions (ØxD) [mm] Ø197 Accessories Included Cut-Out Template Logo Badge Manual Optional Accessories Square Grille Weight [kg] 1.58 Recommended Volume [litre] 5 - 35
