The E-60 WR offers class-leading performance and versatility. With added weather resistance and IP65-rated ingress protection, the E-60 WR in-ceiling loudspeaker is suitable for almost any location, from high-humidity bathrooms to covered outdoor terraces. Suitable for outdoor & high humidity With its engineered, weather-resistant features, the E-60 WR in-ceiling loudspeaker is suitable for covered outdoor and high-humidity locations. With a working range of -20 to +60°C and IP65 rating, it's ready to take on the elements. So whether you want background music for the laundry room, bathroom or spa, or immersive multi-channel sound on the terrace, the E-60 WR delivers. High-performance drivers and low-loss surround The bass/midrange driver incorporates a stiff yet light polypropylene cone and a very low-loss rubber surround for uncoloured and natural midrange combined with deep and rich low frequency performance. The E-60 WR's 25 mm textile dome tweeter offers an impressively extended and detailed upper frequency response. Fine-tuned for any space The E-60 WR is more than an in-ceiling loudspeaker – it's a high-performance sound solution for almost any ceiling and application. Install one or two speakers in your bathroom for high-quality tunes as you shower or several on the terrace for an immersive multi-channel audio space. Easy Installation The dogleg clamp system makes for straightforward installation without the need for special tools. Simply connect the cables to the spring terminals, insert the speaker and turn the four clamp screws to tighten it into place. The speaker is also slim enough to fit into almost any standard ceiling. Paintable Magnetic Grille The white magnetic grille helps the E-60 WR blend discreetly into any room, while the paintable surface lets you add a splash of colour for an aesthetic twist. The grille is also electroplated to add extra protection against the elements. Directional sound for a better experience The 5° off-axis tilt of the E-60 WR drivers means you can rotate the speaker to direct more sound towards the primary listening position. The tilted design also minimises resonance from the driver and baffle, which helps to lower distortion and colouration for a more accurate audio reproduction. Specifications: Frequency range: 52 - 25,000 Hz ±3 dB Sensitivity: 88 dB @ 1 m for 2.83 V Nominal impedance: 8 ohm Maximum SPL: 105 dB Crossover frequency: 3,300 Hz Crossover principle: 2-way Recommended amplifier power: 30 - 120 Watt High frequency driver: 1 x 25mm soft dome High frequency diaphragm: Soft woven fabric Low/Mid frequency driver: 1 x 6½ inch Low/Mid frequency diaphragm: Polypropylene Connection input: Single wire Enclosure type: Open back Installation location: In-ceiling/In-wall Recommended placement: Ceiling/Front/Centre/Surround IP rating: IP65 Outer dimensions incl. grille (H x W x D): 258 x 104 mm Outer dimensions excl. grille (H x W x D): 242 x 100 mm Cut-out dimensions: 225 mm Mounting depth: 96 mm Recommended rear volume: 5 - 50 litres Optimum rear volume: 15 litres Ceiling/wall thickness: 10 - 70 mm Weight incl.grille: 2 kg Shipping weight: 3 kg
