Keithley DAQ6510 Data Acquisition and Logging Multimeter SystemKey Features At A Glance 6½-digit DMM with 0.0025% basic DCV accuracy on the 1 V and 10 V ranges, specified to two years 5-inch (12.7 cm) multi-touch capacitive touchscreen for guided setup, visualization, and analysis 15 measurement functions: DCV, ACV, DCI, ACI, 2-/4-wire resistance, capacitance, frequency, and temperature Standard LAN/LXI and USB-TMC; optional GPIB, RS-232, and TSP-Link cards add six digital I/O ports each Two module slots and a choice of 12 plug-in switch, RF, and control modules connect up to 80 DUTs Up to 80 channels of thermocouple, RTD, or thermistor temperature measurement Scanning speeds up to 800 channels/s with the solid-state relay multiplexer module Onboard TSP scripting automates test sequences without a PC; backed by a three-year warranty The DAQ6510 is a precision data acquisition and logging multimeter system built on Keithley's 6½-digit multimeter technology. It combines a full-featured digital multimeter, a multi-channel scanning switch mainframe, and a datalogger in a single instrument, using a large multi-touch display to guide users through setup, data visualization, and analysis without requiring a PC or custom software for many applications.Across the bench and the production floor, the DAQ6510 is applied to temperature monitoring of devices during environmental testing, HALT and HASS accelerated life testing, high-volume production testing, and the characterization of single or multiple ICs. With two 6×8 matrix modules providing a total of 96 crosspoints, it can test one or multiple ICs, and RF modules allow it to switch signals from wireless devices at frequencies up to 3.5 GHz.Brand HeritageKeithley Instruments now operates as one of the Tektronix family of brands, and current product documentation carries both the Keithley and Tektronix names.Compare Other Models in This SeriesThe DAQ6510 is a single mainframe that adapts to very different test systems through its two module slots and the Series 7700 family of 12 plug-in switch, RF, and control modules. Rather than choosing between separate instruments, a buyer configures one DAQ6510 with the modules that match the channel count, switching topology, and signal type the application requires.The module choices span general-purpose differential multiplexers, a 6×8 matrix, single-pole control, an all-in-one I/O module with analog outputs and a counter/totalizer, digital I/O, solid-state high-speed switching, and 2 GHz and 3.5 GHz RF routing. Each module stores its own relay-closure counts in onboard memory.Each new configuration below is its own dedicated product page with condition-matched pricing. Review the options that fit your channel count and signal requirements, then select the new listing that matches your budget and lead-time needs.Within this system the DAQ6510 mainframe provides the 5-inch multi-touch display, the 6½-digit DMM, onboard TSP scripting, and front-panel terminals for stand-alone DMM use, while the plug-in modules supply the switching and I/O.The Series 7700 modules differ chiefly in channel count, relay technology, voltage and current capacity, and bandwidth. Electromechanical multiplexers such as the 7700 (20 channels, up to 50 MHz bandwidth) and the 7702/7708 (40 channels) handle 300 V at 1 A, while the reed-relay 7703 trades capacity for sub-millisecond switching at 300 V, 500 mA. The solid-state 7710 offers the longest relay life and scanning up to 800 channels/s, but at a lower 60 V capacity.Specialized modules extend the system further: the 7705 provides 40 single-pole control channels at 300 V / 2 A, the 7706 adds digital outputs, analog outputs, and a counter/totalizer, the 7707 combines multiplexing with 32 digital I/O lines, the 7709 is a 6×8 matrix, and the 7711 and 7712 add 2 GHz and 3.5 GHz RF routing. The comparison table summarizes channel count, configuration, voltage and current limits, bandwidth, and switch speed for each. Model Channels Max Voltage Max Switched Current DAQ6510 Up to 80 1000 V — DAQ6510/7700 Up to 80 1000 V — 7700 20 300 V 1 A 7701 32 150 V 1 A Additional differences in specifications beyond the few shown above are not listed here — see each model's full specifications below.Accessories Supplied 1757 Pair, general purpose test lead set, 1000 V Cat II USB-B-1 USB Cable, Type A to Type B, 1 m (3.3 ft) Traceable Calibration Certificate Three-Year Warranty Product Core & Specifications Specification Value DC Voltage Accuracy ±(% of reading + % of range), TCAL ±5°C 100 mV range (100 nV res, >10 GΩ or 10 MΩ ±1%) 1 Year: 0.0030 + 0.0035; 2 Years: 0.0035 + 0.0035 1 V range (1 µV res) 1 Year: 0.0025 + 0.0006; 2 Years: 0.0030 + 0.0006 10 V range (10 µV res) 1 Year: 0.0025 + 0.0005; 2 Years: 0.0030 + 0.0005 100 V range (100 µV res, 10 MΩ ±1%) 1 Year: 0.0040 + 0.0006; 2 Years: 0.0050 + 0.0006 1000 V range (1 mV res, 10 MΩ ±1%) 1 Year: 0.0040 + 0.0006; 2 Years: 0.0050 + 0.0006 DC Voltage Characteristics Input Impedance (100 mV to 10 V ranges) Selectable, >10 GΩ or 10 MΩ ±1% in parallel with
Related
Related
Related
Related