Concert-grade line array output in a box one tech can fly. The DAS Audio EVENT-30A packs 2,000 watts of power and 142 dB of headroom into a 58-lb self-powered enclosure that tunes itself to its place in the array. No amp racks. No tuning laptop. Just fast, repeatable, professional sound for medium and large events. Why the EVENT-30A stands out Self-powered, 2,000 W peak. Dual 10″ neodymium woofers and two 1.75″ M-60 compression drivers run off an onboard high-efficiency Class D amplifier, so there are no separate amp racks to transport or wire. Smart Self-Tuning. Each cabinet automatically detects its position in the array and loads the optimized long-throw or short-throw preset, cutting setup time and eliminating tuning mistakes. 24-bit DSP with FIR processing. Factory-engineered filtering keeps tone and level consistent from the front row to the back wall. Fast Set Splay (FSS) rigging. The captive rigging system lets you set precise vertical splay angles in seconds, with no loose hardware to drop or lose. 90° of even coverage. A controlled horizontal pattern down to 200 Hz spreads sound evenly across wide rooms and large crowds. Light for its class. A rugged trapezoidal polypropylene enclosure holds weight to just 58.3 lbs, so a single tech can lift, stack, and fly it. DAScontrol ready. Monitor and manage the entire system remotely; pairs with the INTEGRAL-M26X and INTEGRAL-M48D processors. Sets itself up so you don't have to Smart Self-Tuning is the headline feature for busy production teams. As you build the array, each EVENT-30A senses where it sits in the hang and applies the correct DSP preset on its own. That means less time on a laptop, fewer chances to misconfigure a box, and a consistent result show after show. Serious output, no amp rack With 1,000 W continuous and 2,000 W peak of onboard Class D power, the EVENT-30A reaches 138 dB linear and 142 dB maximum SPL from a single cabinet. Balanced XLR input and loop-thru make daisy-chaining a full array quick and clean, and powerCON in/out keeps AC distribution tidy across the hang. Built for Houses of worship and performing-arts centers Corporate general sessions and AV production Festivals, fairs, and outdoor stages Theaters and live-music venues Rental and production inventory Fixed installations Technical specifications Transducers (LF) 2 × 10″ neodymium Transducers (HF) 2 × M-60 (1.75″) compression drivers Frequency Range (-10 dB) 63 Hz - 20 kHz Horizontal Coverage (-6 dB) 90º Vertical Coverage Splay dependent Maximum Linear SPL 138 dB Maximum SPL 142 dB Nominal Amplifier Power (continuous) 1000 W Nominal Amplifier Power (peak) 2000 W Amplifier Power LF (continuous / peak) 850 W / 1700 W Amplifier Power HF (continuous / peak) 150 W / 300 W Input Type Balanced Input Impedance 20 kΩ Input Sensitivity 6.2 V (+18 dBu) Audio Signal Input Connector 1 × Female XLR Audio Signal Loop Thru Connector 1 × Male XLR Control DAScontrol Recommended Signal Processing INTEGRAL-M26X / INTEGRAL-M48D AC Input Connector powerCON NAC3MPA AC Output Connector powerCON NAC3MPB Current Draw (230 V / 115 V) 1.5 A / 3.0 A Enclosure Material Polypropylene Enclosure Geometry Trapezoidal Rigging Captive Rigging System Color Black Product Dimensions (H×W×D) 12.1 × 28.0 × 22.0 in Net Weight 26.5 kg / 58.3 lbs Shipping Dimensions (H×W×D) 6 × 48 × 39 in Shipping Weight 29 kg / 64 lbs Building a full rig? Pair the EVENT-30A with a flying frame, matching subwoofers, and an INTEGRAL processor to complete your array. See the recommended accessories below.
Related
Related
Related
Related