The Datatool Evo is an easy to fit alarm system designed for motorcycles and scooters with a 12v battery. Using a sophisticated movement sensor, the Datatool Evo constantly monitors for signs of unauthorised movement, triggering the loud integrated siren when the movement exceeds the permitted level. The movement sensor can be adjusted via the remote control to one of three levels to customise the alarm to your preference. The Datatool Evo also monitors the battery voltage, triggering the alarm if the voltage rises suddenly indicating the engine has been started and also provides visual notification of a low battery by reducing the flash rate of the deterrent LED. Datatool Features: Transport Mode: Ability to arm without movement sensing if the bike or scooter is being transported. Alarm Diagnostics: If the alarm has triggered whilst you were away, the Datatool Evo will bleep a code to tell you which input caused the trigger. Panic Mode: The ability to trigger the alarm from the remote control Automatic Rearm: With this optional feature enabled, the Datatool Evo will rearm automatically if someone tries to disarm the alarm and the engine isn’t started within 30 seconds. Arm/Disarm Tones: Another optional feature, the Datatool Evo can get programmed to ‘chirp’ on arm and disarm and there are 2 options on the ‘chirp’ volume. Note: Certain countries including the UK require alarms to arm/disarm silently, check legislation for your country. Optional Seat Switch / Luggage Loop: Separate trigger wire. You can combine this with a magnetic seat switch or inline connector to extend the level of protection. Prewired with an inline fuse and terminals ready to connect directly to the vehicle battery The LED is a plug-in connection meaning it does not require soldering to install. ‘Protected by Datatool’ decal to highlight to potential thieves that security is present. Remote control THESE UNITS ARE NO LONGER SUPPLIED WITH THE PROTECTED BY DATATOOL DECAL BADGE
