DBX 12x6 Digital Zone Processor 1260m The ZonePRO 1260m 12x6 Digital Zone Processor designed by DBX can distribute up to twelve audio sources across six mono output zones. The included software will be allowing you to adapt the input/outputs quickly to fit your needs. The ZonePRO 1260m features an interactive front panel with an LCD display, comprehensive signal metering, user-specified controls, and paging broadcast buttons. The 1260m will suit a banquet hall or house of worship with versatile routing and plentiful connectivity. The ZonePRO 1260m's pre-configured architecture keeps the input/output addresses simple and fixed. It is having six balanced Euroblock mic/line inputs with gain control, four mono-summed unbalanced RCA input pairs, and an S/PDIF input for up to two channels of digital audio. The DBX 1260m’s six zones output from balanced, line-level Euroblock connectors. Your audio system can be controlled and fine-tuned in the ZonePRO Designer software once the analog cables are connected from your Windows-based PC. The output zones all have individual tone controls, including AutoWarmth and one DSP insert, for optimally tuning the speaker system to the room. For making the most of each source, the ZonePRO 1260m also has independent EQ and two selectable DSP inserts for each of the 12 inputs. ZonePRO Designer Software Compatible with Windows 2000/XP/Vista/7, the ZonePRO Designer software provides a wide range of options for configuring the 1260m's inputs and outputs. Software inserts can apply DSP effects processing to sources and zones, and be automatically set to change on a daily schedule. DSP effects processing Corrective and dynamics processing can be applied individually to each of the input sources and output zones through the ZonePRO Designer software. Effects include AutoWarmth, automatic gain control, ambient noise compensation, notch filter, compressor, gate, de-esser, and advanced feedback suppression. User friendly pre-configured input/output architecture The analog cabling of the dbx ZonePRO 1260m is straight-forward and uncomplicated, making your inputs/outputs much easier to recognize and control from within the software. Supports ZC-series remote controls The ZC-series remote controls can toggle volume, input source, and Scenes. They extend from the 1260m by CAT 5 Ethernet cable, and can be mounted in an output zone up to 1,000 feet (304.8 m) away. PC and third-party connectivity The 1260m can connect to a Windows-based PC or a third-party controller by either Ethernet or RS-232 serial port. Specifications Dbx 1260m Specs Front Panel: Six-segment Lightpipe output meters from -30 to +20 dBuOutput threshold metersLCD display shows information on source, page steering, zone volume, and mute Inputs: Euroblock mic/line x6Unbalanced, mono-summed RCA input pairs x4S/PDIF 2 channel input x1 Input Impedance: Euroblock:>50kΩ balanced>25kΩ unbalancedRCA:>25kΩ unbalanced Phantom Power: +15VDC Maximum Input Level: +20dBu mic/line, +12dBu RCA CMRR: > 40dB, typically >55db @ 1kHz Mic Pre Gain: 30 to 60 dB Mic Input Noise (E.I.N.): < -118 dBu, 22Hz-22kHz, 150Ω source impedance Outputs: Balanced, RF filtered Euroblock x6 Output Impedance: 120Ω balanced60Ω unbalanced Maximum Output Level: +20 dBu A/D Conversion: dbx Type IV conversion systemDynamic range line:>113dB, A-weighted, >110dB unweightedType IV dynamic range:>119dB, A-weighted, 22kHz BW>117dB, unweighted, 22kHz BW Sample Rate: 48 kHz D/A Conversion: Dynamic range:112dB A-weighted, 109dB unweighted, 22kHz BW DSP Effects: Available on Input Inserts:Automatic gain controlNotch filterCompressorGateDe-esserAdvanced feedback suppressionAvailable on Output Inserts:Automatic gain controlAmbient noise compensationAutoWarmthCompressorLimiter Dynamic Range: >110dB A-weighted>107dB unweighted THD + N: 0.003% typical at +4dBu, 1kHz, 0dB gain Frequency Response: 20 - 20,000 Hz, +/- 0.5dB Crosstalk: Interchannel: >80dB typicalInput to Output: >80dB Propagation Delay: 0.8 msec Computer Connectivity: Ethernet RJ45 x1RS-232 serial port x1 Operating Systems Supported: Windows 2000/XP/Vista/7No 64-bit support Remote Control Input: RJ-45 x2Up to 6 ZC-series remotes can be connected to each inputWired in series: supports total distance of 300 ft (91.4 m) of CAT 5 cableWired in parallel using ZC-BOB: up to 1,000 ft (304.8 m) each Operating Voltage: 100-240 VAC, 50/60 Hz Power Consumption: 27 watts BTU:
Related
Related
Related
Related