DBX ZonePro 641m 6x4 Digital Zone Processor The ZonePRO 641m offers fixed I/O, pre-configured architecture, configurable insert processing and optional duplication of audio channels to another ZonePRO device via a link bus. The 641m features a total of six inputs and four outputs. Inputs include four balanced mic/line switchable terminal block inputs and two mono-summed pairs of unbalanced RCA inputs. Hardware-controlled microphone gain allows adjustment of microphone gain per channel. The 641m device has a pre-configured architecture with input processing, a central matrix and output processing. Two input insert positions and one output insert position allow channel-specific insert processing to be configured. AutoWarmth, a psychoacoustic function that maintains full frequency bandwidth even when the signal level has dropped, is permanently available on each output zone. A link bus allows duplication of the first six audio channels to another ZonePRO device in applications where additional output zones are required. The front panel of the 641m features a power status LED, a network traffic LED, and an RS-232 control port. Additional system control is offered in the form of optional Zone Controllers. This collection of hardware wall-controllers represents a series of simple, elegant user interfaces for functions such as volume, source and preset control. All ZonePRO devices can be controlled by third party control systems via RS-232 or Ethernet as applicable (see table for further information). ZonePRO Designerthe configuration, control and monitoring software for the ZonePRO family of devicesoffers control of the ZonePRO 641m via Ethernet or RS-232. The Configuration Wizard within ZonePRO Designer guides users through the step-by-step configuration process of the 641m. Recommended for: Installed. Key Features 6 Inputs / 4 Outputs 4 Balanced Mic/Line Inputs 2 Unbalanced, Mono-Summed RCA Input Pairs Microphone Gain per Channel Pre-Configured Architecture Two Configurable Input Insert Positions One Configurable Output Insert Position AutoWarmth per Output Zone Link Bus Optional ZC Controllers Ethernet Control Serial Control Third Party Control Wizard-Driven Configuration Technical Specifications Indicators Network Traffic, Power Input 6 Total (4) Switchable Mic or Line, (2) Unbalanced, Mono-Summed RCA Input Pairs Input Connectors Euroblock (Line and Mic) RCA (Source) Input Type Electronically balanced/RF-filtered Input Impedance Euroblock: >50k Balanced, >25k Unbalanced, RF Filtered; RCA: >25k Unbalanced, RF Filtered Max Input +20dBu Mic/Line, +12dBu RCA CMRR >40dB, typically >55dB @ 1 kHz Mic Preamp gain 30 to 60dB Mic Preamp Equivalent Input Noise (EIN) < -118dBu, 22Hz-22kHz, 150 Source Impedance Mic Preamp Phantom Power +15VDC Output 4 total Output Connectors Euroblock Output Type Electronically Balanced, RF Filtered Output Impedance 120 Balanced, 60 Unbalanced Max Output +20dBu A/D Converter dbx Type IV conversion system A/D Dynamic Range (line) >113 dB, A-weighted, >110 dB unweighted Type IV Dynamic Range >119dB, A-weighted, 22kHz; BW: >117dB, unweighted, 22kHz BW Digital Output Dynamic Range >114 dB A-weighted, 110dB unweighted Sample Rate 48kHz D/A Dynamic Range 112 dB A-weighted, 109dB unweighted, 22kHz BW Dynamic Range >109 dB A-weighted, >106 dB unweighted, 22kHz BW THD+Noise 0.003% typical at +4dBu, 1kHz, 0dB gain Frequency Response 20Hz - 20kHz, +/-0.5dB Interchannel Crosstalk >80dB typical Propagation Delay 0.6 msec Operating Voltage 100VAC 50/60Hz, 120VAC 60Hz and 230VAC 50/60Hz Power Consumption 29 W BTU
Related
Related
Related
Related