DC Electronics Microsteer Kit is a universal Electric Power Assisted Steering (EPAS) system. It can be easily fitted to most vehicles, where a manual steering system currently exists. Easy-to-install, Customize the assistance amount with the Tuning Box for a perfect fit. ideal for classic and kit cars, etc. This smaller and more compact unit to help with installation where size may be a factor. This motor/gearbox/unit is also designed to go in line with the existing steering column between the steering wheel and the manual steering Rack or Box, being smaller it can be used in tighter installations, where the size of the unit is a factor. Kit includes: Motor/Gearbox (MGU) Electronic Control Unit (ECU) Tuning Box Wiring Harness Input and Output Shafts Optional Extras: EPAS200W Microsteer Speed Sensor EPAS200SC Microsteer Straight Coupler EPAS200UJ Microsteer Universal Joint Technical Specification Operating Voltage Nominal 13.8V DC Maximum current draw 30 Amps Average current draw - Amps (normal urban use): Less than 5 Amps System Weight: MGU & ECU 4.4kg / 9.70lb Maximum Torque Output 36Nm / 26.5ft.lb IP Rating IP67 Operating Temperature -20 to 120°C / -4 to 248°F Motor Rated Power 220 Watt Input/Output Spline Pattern 17mm x 36 / 11/16” x 36 Please note: The Microsteer MGU (EPAS200) has a maximum torque output of 32Nm (24lb. Ft) plus the driver input. To ensure that this kit is the most suitable for your needs, it is recommended to test the torque of your current manual steering system. This can be easily done by using a torque wrench on the steering wheel lock nut while the vehicle is on the ground and turned off. Measure the torque required to turn the steering wheel and use this as an indicator to determine which kit will best suit your vehicle's needs. Our range of kits includes various torque outputs, so please contact us for more information on which kit is best for your specific application. If your current manual steering system is below 32Nm then the Microsteer kit will work well.
