This is the labour to fit a three-camera dash cam system where the rear camera mounts on the outside of the vehicle — front camera on the windscreen, cabin-facing camera inside, and the rear camera mounted externally on the tailgate, bumper or roofline. What it costs $260 flat rate Same day — by appointment, so your vehicle goes straight onto a bay Backed by our lifetime installation warranty Why an exterior camera costs more than an interior one A camera mounted inside the glass is protected from everything. One mounted outside has to survive road salt, high-pressure car washes, freeze-thaw cycles and standing water — for years. That changes the job. The cable has to pass through the body, which means finding or making a sealed entry point and weatherproofing it properly. The mount has to hold through vibration and winter. And the run is longer, because the cable travels outside the cabin before it comes back in. Done badly, water tracks down the cable into the vehicle, which is a far more expensive problem than the camera. That's the whole difference between this rate and our standard three-channel install. Same number of cameras, different job. What's included Mounting all three cameras — front, cabin-facing and exterior rear A sealed, weatherproofed cable entry, with the run concealed inside the vehicle Hardwiring to a fused source or power management device, with parking mode configured Setting time, date and GPS, aligning every angle, and confirming all three channels record before you leave A walkthrough of the app and how to pull footage off the card Which install do I need? If all three cameras mount inside the vehicle, you want DCAM3-Install at $210. If two cameras mount outside, that's DCAM3EXT2-Install. Not sure which applies to your system? Tell us the model and we'll confirm before you book. Bringing your own system? That's fine, and this rate covers fitting it. We'll handle the mounting, sealing, wiring, setup and testing. Note that we can't diagnose faults in hardware we didn't supply without a separate troubleshooting charge. Booking Add this to your order and we'll contact you after checkout to arrange a time at our Markham shop, and confirm how long your vehicle will need. One thing worth knowing Every vehicle is different. Depending on make, model and year, some installations need additional parts — relays, diodes, resistors, grommets or a vehicle-specific harness — which are charged separately if required. We'll always tell you before doing the work, not after.
Related
Related
Related
Related