APPLICATION INSTRUCTIONS: PREPARE SURFACE Clean the surface where the transfer will be applied, ensuring that the surface is free of dirt, debris and lint and is dry PREPARE TRANSFER Using your craft squeegee, carefully rub over the transfer while it is still on the white backing. This helps to ensure there are no bubbles between the image and the transfer sheet REMOVE BACK PAPER LINER Slowly remove the clear transfer film, which holds the image, from the back paper liner ALIGN TRANSFER & PRESS After removing the back paper liner, carefully apply the transfer to the surface using your craft squeegee to go over the transfer, removing any air bubbles as you go. Ensure you've firmly pressed the transfer to the surface REMOVE CLEAR TRANSFER FILM Carefully peel up the top layer of film, working your way from one side to the other. Work slowly and carefully while watching that the design is not lifting with the transfer film. If you find that it is lifting, squeegee the remaining film again before peeling the remaining transfer film
