The low cost alternative made in Germany. Product Datasheet. In German and English (half way through). Decoderwerk 30303 provides functionality of Marklin 74465/6 decoder, but for a lot less! Description The decoder has 3 outputs. Operation can be done with DCC or Märklin ® Motorola. The decoder is suitable for controlling Märklin ® C-track three-way turnouts and the optional turnout lanterns. 100% quality control of all decodersDevelopment and production in GermanyWe only use components from well-known brand manufacturers Compatible Decoder The decoder is the ideal alternative for the built-in digital decoders 74465 and 74466. Drives The decoder can be connected directly to the electric point drives 74490, 74491 and 74492. Märklin C-Track The decoder can be inserted and connected directly into the three-way switch 24630. Tension Build up 9-24V track voltage The decoder is powered directly by the track voltage. No separate power supply can be connected. Performance 9-24V DC voltage 1A current The outputs can be loaded with 1A and provide 9-24V DC voltage. Requirement Quiescent current below 5mA The decoder itself requires less than 5mA in idle mode. The current consumption of the output depends on the connected device. Short circuit The decoders are protected against short circuits with a self-resetting fuse. Coupling Artificial intelligence? A little bit, anyway. The decoder features an automatic learning mode for addressing. All you have to do is press a button and call up the desired addresses on your central unit. Done. Remote control: The decoder can be configured directly at its location from a DCC central unit using Programming-on-Main. All CVs can be updated. Inspection The decoder can be configured on a DCC programming track. All CVs can be read and written via Direct Mode. configuration Standard By default, the output makes small steps with a switching pulse of 400ms. Let there be light The decoder supports the control of the switch lamps and automatically restores the last switching of the switch lamps when the decoder is started. Small steps: You can adjust the switching pulse individually. Switching pulses from 10 ms to 2,550 ms are possible, in small increments of 10 ms. Logical For central units that do not have their own switching symbol for the three-way switch, such as the Märklin Mobile Station, the switching logic automatically generates the necessary switching commands. installation Connections The decoder has all the connection cables for direct installation in a Märklin C-track three-way turnout. Mounting The decoder can be easily mounted in the inner bed of a C-track three-way turnout from Märklin.
Related
Related
Related
Related