This is new generation F7 AIO designed for Defender 25. A future proof all-in-one FC to step up the game and make some more room for future flight firmware development like Betaflight, Emuflight etc. Lightweight, minimum size, minimum work. Solder your motor wires on and let's go! Highlights: Pass-through DJI O3 and Caddx Vista/Polar Connector MCU: STM32F722 Gyro: ICM42688 OSD: NO Blackbox: 32MB Onboard Flash Gyro: DPS310 Weight: 12.8g±0.2g FC Specifications: MCU: STM32F722 Gyro: ICM42688 Blackbox: 32MB Onboard Flash BEC output: 5V 2.5A WS2812 LED Strip: Yes Buzzer: Yes Barometer: DPS310 Connector: SH1.0 to Type-C adapter OSD: N/A (HD VTX version) FC Firmware： IFLIGHT_BLITZ_F722_X1 Mounting pattern: 25.5*25.5mm φ3mm Dimensions: 32.5*32.5mm Input voltage: 2-4S, support LIHV battery Smartaudio / IRC Tramp VTX protocol supported ESC Specifications: ESC MCU: STM32G071 Driver: FD6288 Input voltage: 2-4S Support LIHV battery Output current: 20A, peak value 30A (10 seconds) ESC firmware: IFLIGHT_BLITZ_G071_01 Current sensor: ratio 200 (1/10mV/A) BEC: NO ESC Telemetry: Yes（PCB routed, set UART6 for telemetry） Bidirectional DShot: Yes Supports DShot DShot150/300/600/MultiShot/ OneShot etc. Packing List: 1 x Defender 25 BLITZ F7 AIO 1 x Capacitor 470uF/35V (Onboard) 1 x XT30U Male 18AWG cable 70mm 1 x 1.0-7P cable 50mm-28mm 1 x 1.0-7P cable 50mm 4 x M2 silicon grommets
