Dell PowerEdge R330 Server

Cloud Ninjas Verified independent store

→

Cloud Ninjas' Dell PowerEdge R330 Specifications Chassis The Dell PowerEdge R330 server is a flexible and capable system that is great for businesses of all sizes. This 1U rackmoun t server has three chassis options to choose from: 4 Bay LFF Cabled, 4 Bay LFF Hot-swap, and 8 Bay SFF Hot-swap. 4 Bay LFF Cabled and Hot-swap The 4 Bay LFF chassis for the PowerEdge R330 comes in a cabled drive or hot-swap drive version. Both chassis are the exact same, except for the drive bays. Both chassis accept up to four 3.5" SAS/SATA drives. 2.5" hard drives or solid state drives can be installed via a 2.5" to 3.5" drive adapter. The cabled chassis has cables that plug directly into the drive, and the drive can only be removed from the inside of the chassis. Drives in the 4 Bay LFF cabled chassis cannot be installed/removed while the system is powered on. For the hot-swap chassis, drives can be added or removed while the system is powered on. You also do not need to open the server in order to add/remove drives. The rear of both chassis include a serial connector, a VGA port, a removable iDRAC port, a removable vFlash card slot, two 1GbE RJ45 Ethernet LAN ports, two USB 3.0 ports, one low-profile PCIe 3.0 slot, one full-height PCIe 3.0 slot, and two hot-swap power supply bays. 8 Bay SFF Hot-swap The 8 Bay SFF Hot-swap chassis is very similar to the 4 Bay LFF Hot-swap chassis, but accepts up to eight 2.5" SAS/SATA drives. This chassis supports hot-swap drives, meaning that drives be added/removed while the server is powered on. The 8 Bay SFF chassis has the exact same rear as the 4 Bay LFF cabled and 4 Bay LFF hot-swap. The rear includes a serial connector, a VGA port, a removable iDRAC port, a removable vFlash card slot, two 1GbE RH45 Ethernet LAN ports, two USB 3.0 ports, one low-profile PCIe slot 3.0, one full-height PCIe 3.0 slot, and two hot-swap power supply bays. Processing Power The Dell PowerEdge R330 server has a single LGA1151 socket and supports Intel Xeon E3-1200 v5 and E3-1200 v6 series processors. Intel Core i3 6100, Celeron G3900, Pentium G4500, and Pentium G4600 series processors are also supported. A maximum of 4 CPU cores is supported. Intel Xeon E3-1200 v5 Series CPU Step Code Cores Frequency E3-1220 v5 SR2LG 4 3.00 GHz E3-1225 v5 SR2LJ 4 3.30 GHz E3-1230 v5 SR2LE 4 3.40 GHz E3-1235L v5 SR2LM 4 2.00 GHz E3-1240 v5 SR2LD 4 3.50 GHz E3-1240L v5 SR2CW 4 2.10 GHz E3-1245 v5 SR2LL 4 3.50 GHz E3-1260L v5 SR2LH 4 2.90 GHz E3-1268L v5 SR2LQ 4 2.40 GHz E3-1270 v5 SR2LF 4 3.60 GHz E3-1275 v5 SR2LK 4 3.60 GHz E3-1280 v5 SR2LC 4 3.70 GHz Intel Xeon E3-1200 v6 Series CPU Step Code Cores Frequency E3-1220 v6 SR329 4 3.00 GHz E3-1225 v6 SR32C 4 3.30 GHz E3-1230 v6 SR328 4 3.50 GHz E3-1240 v6 SR327 4 3.70 GHz E3-1245 v6 SR32B 4 3.70 GHz E3-1270 v6 SR326 4 3.80 GHz E3-1275 v6 SR32A 4 3.80 GHz E3-1280 v6 SR325 4 3.90 GHz E3-1285 v6 SR373 4 4.10 GHz Memory DIMM slots & Memory Channels The Dell PowerEdge R330 is a DDR4 based machine with four total DIMM slots. There are two memory channels, that each consist of two DIMM slots. Supported Memory Types ECC Unbuffered (ECC UDIMMs) are the only type of memory that is supported by the R330. Installing unsupported memory types can lead to many issues, such as boot failure. Supported Memory Capacities Module capacities of 4GB, 8GB, 16GB, and 32GB are accepted by the R330 server. It is important to note, that only two 32GB modules can be installed. You are not able to fill up all four DIMM slots using 32GB modules. Max Configurations A maximum RAM configuration of 64GB can be achieved via 4 x 16GB or 2 x 32GB modules. 64GB is the highest possible capacity that can be reached for the PowerEdge R330 server. Supported Memory Speeds The PowerEdge R330 server supports module speeds of 2133MT/s and 2400MT/s. The fastest speed that the installed modules can run at will be determined by the processor that is installed. If you have a E3-1200 v5 series processor installed, a maximum speed of 2133MT/s is supported. If a E3-1200 v6 processor is installed, then there is a maximum speed of 2400MT/s. If you installed a module with a speed that is higher than the maximum supported speed, that module will clock down to the max speed. For example, if your system has a max speed of 2133MT/s, and you install a 2400MT/s module, the module will clock down to 2133MT/s. Storage Supported Drives Type Speeds Max Capacity (Per Drive) 2.5" SAS 7.2K, 10K, 15K 2.4TB SATA 7.2K 2TB SSD 3GB/s, 6GB/s, 12GB/s 7.68TB Type Speeds Max Capacity (Per Drive) 3.5" SAS 7.2K 16TB SATA 7.2K 14TB SSD 3GB/s, 6GB/s, 12GB/s 7.68TB Power Supplies Power Supplies Overview There are two power supply options for the PowerEdge R330 server: 350W hot-swap and 550W hot-swap. The R330 has two hot-swap power supply bays on the rear, which allows you to plug in up to two power supply units. If you install two power supplies, the wattages must be matching. Utilizing two power supplies allows for redundancy, so if one unit fails, the other unit will take over, keeping your server online. Power supplies can added or removed while the system is powered on, as long as one unit remains plugged into the server. RAID Options The Dell PowerEdge R330 server does not accept Mini Monolithic PERC RAID Controllers. Only PCIe RAID controllers can be installed into the Dell R330. In the rear of the R330, there a dedicated PCIe slot for RAID controllers. RAID Options RAID Levels Cache Drive Speeds PCIe Generation RAID Hardware S130 onboard software 0,1,5,10 None 6 Gb/s SATA12 Gb/s SAS PCIe 3.0 Software H330 0,1,5,10,50 None 6 Gb/s SATA12 Gb/s SAS PCIe 3.0 Hardware H730 0,1,5,6,10,50,60 1GB 6 Gb/s SATA 12 Gb/s SAS PCIe 3.0 Hardware H730P 0,1,5,6,10,50,60 2GB 6 Gb/s SATA 12 Gb/s SAS PCIe 3.0 Hardware H830 0,1,5,6,10,50,60 2GB 6 Gb/s SATA 12 Gb/s SAS PCIe 3.0 Hardware Network Interface Card Options The Dell PowerEdge R330 server has two 1GbE RJ45 LAN ports built into the motherboard. The R330 does not have a Daughter Card slot. If you want 10GbE speeds, additional network ports, and/or fiber connectivity (SFP+), you must install a PCIe network card into one of the R330's PCIe slots. PCIe Network Cards Broadcom 5719 Quad Port 4 x 1GbE RJ45 Broadcom 5720 Dual Port 2 x 1GbE RJ45 Broadcom 57402 Dual Port 2 x 10GbE SFP+ Broadcom 57406 Dual Port 2 x 10GbE RJ45 Broadcom 57810 Dual Port 2 x 10GbE RJ45 Broadcom 57810 Dual Port 2 x 10GbE SFP+ CNA Intel I350-T2 Dual Port 2 x 1GbE RJ45 Intel I350-T4 Dual Port 4 x 1GbE RJ45 Intel 57810S Dual Port 2 x 10GbE RJ45 Intel 57810S Dual Port 2 x 10GbE DA/SFP+ Intel X520-DA2 Dual Port 2 x 10GbE DA/SFP+ Intel X540-T2 Dual Port 2 x 10GbE RJ45 Intel X710-DA2 Dual Port 2 x 10GbE DA/SFP+ Intel X710-T4 Quad Port 4 x 10GbE RJ45 CNA Intel X710-DA4 Quad Port 4 x 10GbE SFP CNA Intel XL710-QD2 Dual Port 2 x 40GbE QSFP Intel OPA Single Port 1 x 100Gb QSFP HFA Brocade 815 Single Port 1 x 8Gb FC SFP+ HBA Brocade 825 Dual Port 2 x 8Gb FC SFP+ HBA Brocade 1020 Dual Port 2 x 10Gb SFP+ CNA QLogic QLE2560 Single Port 1 x 8Gb FC HBA QLogic QLE2562 Dual Port 2 x 8Gb FC HBA QLogic QLE2564 Quad Port 4 x 8Gb SFP+ HBA QLogic QLE2660 Single Port 1 x 16Gb SFP+ HBA QLogic QLE2662 Dual Port 2 x 16Gb SFP+ HBA QLogic QLE2690 Single Port 1 x 16Gb SFP+ HBA QLogic QLE2692 Dual Port 2 x 16Gb SFP+ QLogic QLE2742L Dual Port 2 x 32Gb FC HBA QLogic QLE8262 Dual Port 2 x 10GbE SFP+ CNA Mellanox ConnectX-3 CX322A Dual Port 2 x 10GbE SFP+ Mellanox ConnectX-3 CX324A Dual Port 2 x 40Gb QSFP HBA Mellanox ConnectX-3 CX354A Dual Port 2 x 10GbE SFP+ Mellanox ConnectX-3 Single Port 1 x 40Gb QSFP Mellanox ConnectX-4 CX4121A Dual Port 1 x 25GbE SFP+ Mellanox ConnectX-4 CX456A Dual Port 1 x 100GbE QSFP Mellanox ConnectX-5 Single Port 1 x 100Gb QSFP Dell Emulex LPE12000 Single Port 1 x 8Gb SFP+ HBA Dell Emulex LPE12002-E Dual Port 2 x 8Gb SFP+ HBA Dell Emulex LPE15002B-E Dual Port 2 x 8GbE SFP+ HBA Dell Emulex LPE16002 Dual Port 2 x 16GbE SFP+ HBA Dell Emulex LPE35002 Dual Port 2 x 32Gb FC SFP+ HBA Dell Emulex OCe14102-U1D Dual Port 2 x 10GbE SFP CNA Dell Emulex OCe14102B-U1D Dual Port 2 x 10GbE SFP+ Dell Emulex OCe14102B-N1D Dual Port 2 x 10GbE SFP+ CNA Chelsio T520-CR Dual Port 2 x 10GbE SFP+ CNA Systems Management Solutions The Dell PowerEdge R330 Server utilizes the Integrated Dell Remote Access Controller 8 (iDRAC8), which allows you to easily manage your Dell server. The iDRAC8 web interface provides a variety of useful information and features, that make managing your Dell server an easy task. Features include, but are not limited to hardware monitoring, power control, remote console, control over system settings, firmware update control, storage management, and much more. You can access the iDRAC8 web interface, by setting the iDRAC IP in system setup and searching the IP in a web browser. Supported Operating Systems: The Dell PowerEdge R330 Server supports a wide variety of operating systems which ranges from different distributions of Linux, VMware, and Windows Server. The operating systems include, but are not limited to: ⦿ Citrix XenServer 7.0 ⦿ Novell SuSE Linux ES 11 ⦿ Red Hat® Enterprise Linux 6 ⦿ Red Hat® Enterprise Linux 7 ⦿ SUSE Linux ES 12 ⦿ VMware ESXi 5.5 ⦿ VMware ESXi 6.0 ⦿ VMware ESXi 6.5 ⦿ VMware ESXi 6.7 ⦿ Window Server 2008 R2 ⦿ Window Server 2012 ⦿ Window Server 2012 R2 ⦿ Window Server 2016 ⦿ Window Server 2019 LTSC Show more