Quick Specs Form Factor: 2U rack server Processor | Max: 128 Cores 1x Gen 4 AMD EPYC 9004 Series Memory | Max: 3TB 12 ECC DDR5 RDIMM 4800Mhz Storage | Max: 368.64TB Front bays: Up to 8x 3.5" SAS/SATA (HDD/SSD) Max: 160 TB Up to 12x 3.5" SAS/SATA (HDD/SSD) Max: 240 TB Up to 8x 2.5" SAS/SATA/NVMe (HDD/SSD) Max: 122.88 TB Up to 16x 2.5" SAS/SATA/NVMe (HDD/SSD) Max: 245.76 TB Up to 24x 2.5" SAS/SATA/NVMe (HDD/SSD) Max: 368.64 TB Up to 8x EDSFF E3.S Gen5 NVMe Max: 61.44 TB Up to 16x EDSFF E3.S Gen5 NVMe Max: 122.88 TB Up to 32x EDSFF E3.S Gen5 NVMe Max: 245.76 TB Rear bays: Up to 2 x 2.5" SAS/SATA/NVMe (HDD/SSD) Max: 30.72 TB Up to 4 x 2.5" SAS/SATA/NVMe (HDD/SSD) Max: 61.44 TBSupported in the 12LFF and the 24SFF Backplane Boot Options Boot Optimized Server Storage (BOSS-N1) Hot-SwapUSB RAID Controller: (Adapter PERC) S160 (SATA/NVMe SW RAID) H355, H755, H755N, H965i, HBA355i, HBA355e, HBA465e LOM 2 x 1GbE LOM card with BCM5720 LAN controller Networking Options | Max Speed: 4x 25GbE Ports OCP 3.0 x8 Mezz 3.0 Remote Management: iDRAC9 with Lifecycle Controller PCIe Slots Max: 8 4 x PCIe Gen5 slots4 x PCIe Gen4 slots GPU: Up to 3 x 300 W DW or 6 x 75 W SW Other Versions R73X Series R74X Series R75X Series R76X Series R77X Series (Click to View) Ideal for: Data Analytics High-Performance Computing (HPC) Virtual Desktop Interface (VDI) Virtualization The Dell PowerEdge R7615 is a configurable 2U rack server featuring 12 DDR5 DIMM slots, supporting RDIMMs with up to 3TB of maximum memory and speeds up to 4800 MT/s. With a wide range of chassis options available, this flexible server solution can be tailored to fit a variety of enterprise workloads. For more configuration details, refer to the "Cable Routing" section of the manual below. Drive Options | Front & Rear Drive Configuration Options: There are a few chassis options. Up to 8x 3.5" SAS/SATA (HDD/SSD) Max: 160 TB Up to 12x 3.5" SAS/SATA (HDD/SSD) Max: 240 TB Up to 8x 2.5" SAS/SATA/NVMe Universal Max: 122.88 TB Up to 8x 2.5" NVMe Up to 16x 2.5" (8 Universal + 8 Universal) Up to 24x 2.5" SAS/SATA/NVMe Universal Max: 368.64 TB Up to 24x 2.5" NVMe Passive Up to 8x EDSFF E3.S Gen5 NVMe (SSD) Max: 61.44 TB Up to 16x EDSFF E3.S Gen5 NVMe (SSD) Max: 122.88 TB Up to 32x EDSFF E3.S Gen5 NVMe (SSD) Max: 245.76 TB Read Drive Options The Dell PowerEdge R7615 offers two rear drive options, supported only on the 12 LFF and 24 SFF backplane chassis configurations: a stacked side-by-side 4xSFF drive cage and a side-by-side 2xSFF drive cage. Both options occupy the same space as certain PCIe slots. The table below outlines all available configurations for the Dell PowerEdge R7615 rack server. AMD Processor & Heatsink The Dell PowerEdge R7615 supports one 4th Generation AMD EPYC 9004 Series processor, with up to 128 cores per processor. Heatsink & Fans The Dell PowerEdge R7615 requires specific cooling components based on CPU TDP, storage modules, rear drives, GPU presence, and persistent memory, ensuring optimal thermal performance across configurations. GPU installations require an L-Type heat sink. The system supports two cooling options — air cooling or optional Direct Liquid Cooling (DLC), with DLC required for certain CPU SKUs and configurations. Note that DLC is not a self-contained solution and requires rack-level support (see DLC 3000 or DLC 7000 products). The Dell PowerEdge R7615 supports up to six high-performance fans, available in Silver (HPR SLVR) or Gold (HPR Gold) grades. For all the details about the cooling specs of this server, please view the “Thermal restriction matrix” on the Dell R7615 Installation and Service Manual. Memory Options With a single processor, the Dell PowerEdge R7615 rack server supports 12 DDR5 DIMM slots, with RDIMMs up to 3TB max and speeds up to 4800 MT/s. The R7615 supports registered ECC DDR5 DIMMs only. Unbuffered DIMMs (UDIMMs) are not supported. DIMM type DIMM rank DIMM capacity Single processor Data Width DIMM Volts (V) Minimum system capacity Maximum system capacity DDR5 RDIMM Single rank 16 GB 16 GB 196 GB x8 1.1 DDR5 RDIMM Dual rank 32 GB 32 GB 384 GB x8 1.1 DDR5 RDIMM Dual rank 64 GB 64 GB 768 GB x4 1.1 DDR5 RDIMM Quad rank 128 GB 128 GB 1536 GB x4 1.1 DDR5 RDIMM Octa rank 256 GB 256 GB 3072 GB x4 1.1 Note: Do not mix x4 and x8 DIMMs with a memory channel. Note: Unbuffered DIMMs (UDIMMs) are not supported. Networking Adapters Options The Dell PowerEdge R7615 supports up to two 10/100/1000 Mbps Network Interface Controller (NIC) ports, available via the embedded LAN on Motherboard (LOM) and integrated Open Compute Project (OCP) cards. Feature Specifications (Optional) LOM card 1 Gb x 2 (Optional) OCP card (OCP 3.0) 1GbE x 4, 10 GbE x 2, 10 GbE x 4, 25 GbE x 2, 25 GbE x 4 Note: The system allows either LOM card or an OCP card or both to be installed in the system Note: On the system board, the supported OCP PCIe width is x8; when x16 PCIe width is installed, it is downgraded to x8. Storage Controllers Options The Dell PowerEdge R7615 supports PERC 11 and PERC 12 cards for RAID and networking functionality. For mixed-drive configurations, two options are available: the 24-bay Universal Chassis with direct-connect NVMe ports supporting up to 8 drives, or the 8 SFF NVMe Chassis paired with an additional 8 SFF Universal backplane for a total of 16 drives. Note that the 8 SFF NVMe backplane is not direct-connect and requires an fPERC installation. There are a few more configurations worth looking into. You can find them in the cabling section of the manual below. Supported storage controller card Software RAID S160 Internal controllers PERC H965i PERC H755 PERC H755N PERC H355 Internal Boot Boot Optimized Storage Subsystem (BOSS-N1): HWRAID 2 x M.2 SSDs External controllers HBA355e HBA465e SAS Host Bus Adapters HBA355i Expansion Slots Up to eight PCIe slots, 4 x PCIe Gen5 slots, and 4 x PCIe Gen4 slots. PCIe Riser Configurations Click to view more details about each configuration. Config # RSR Configuration # of CPUs PERC type supported Rear Storage Possible 0 NO RSR 1 Front PERC No 1 R2a + R3a + R4p (HL) 1 Front PERC/ PERC Adapter No 2 R1u + R2a + R3b + R4q 1 Front PERC/ PERC Adapter No 3-1 R1t + R2t + R3b + R4p (HL) 1 Front PERC/ PERC Adapter No 3-2 R1t + R2t + R3b + R4p (FL) 1 Front PERC No 4-2 R1t + R2t + R3a + R4p (HL) 1 Front PERC No 4-2 R1t + R2t + R3a + R4p (FL) 1 Front PERC No 5-1 R1t + R2t + R3a + R4s (HL) 1 Front PERC No 5-2 R1t + R2t + R3a + R4s (FL) 1 Front PERC/ PERC Adapter No 6 R2t + R4q 1 Front PERC/ PERC Adapter Yes 7 R1u + R2t + R4q 1 Front PERC/ PERC Adapter Yes 8 R2a + R4a (HL) 1 Front PERC/ PERC Adapter No 9 R2a + R3a + R4p (HL) 1 PERC Adapter Yes 10 R1u+R3b+4q (HL) 1 Front PERC/ PERC Adapter Yes GPU The Dell PowerEdge R7615 rack server supports up to three 300W double-wide GPUs or six 75W single-wide GPUs. Below is a parts reference outlining what's needed for GPU installation. For more detailed guidance, refer to the manuals below. Components GPU FL kit Details Quantity Risers Riser configuration (RC) 3-2, 5-2*, or, 10-2* RC 3-2: R1P^ (FL) + R2A (HL) + R3B (HL) + R4P^ (FL)RC 5-2: R1R (FL) + R2A (HL) + R3A (FL) + R4P^ (FL)RC 10-2: R1P^ (FL) + R2A (HL) + R4R (FL) Shroud GPU shroud 1 Fans HPR GOLD fan 6 Heat sinks L-type heat sink for processor 1 and processor 2 RC 3-2, 5-2: 2RC 10-2: 1 Cables Power cable 2 x 4 (8-position) or 2 x 6 + 1 x 4 (12-position + 4-sideband) FL - Full Length, HL - Half Length, HPR - High Performance, RC - Riser configuration GPU is not supported on 12 x 3.5-inch configs and system configs with rear module installed. “High-Performance GOLD Fan” to be supported on all GPU configs R1P and R4P supports Double Width (DW) GPU. The configuration 5-2 supports DW GPU only on slots 7 and configuration 10 supports DW GPU only on slot 2. All GPU cards require L-type heat sink and GPU shroud, irrespective of the length. However, the cooling fan and foam are dependent on different configurations Power, Dimensions, and Weight Power Dual hot-swap redundant Power Supplies. Do not mix power supplies. 2400W Platinum 100—240 VAC or 240 HVDC 1800W Titanium 200—240 VAC or 240 HVDC 1400W Platinum 100—240 VAC or 240 HVDC 1100W Titanium 100—240 VAC or 240 HVDC 1100W LVDC -48 — -60 VDC 800W Platinum 100—240 VAC or 240 HVDC 700W Titanium 200—240 VAC or 240 HVDC Dimensions & Weight: Width: 482 mm (18.97")Height: 86.8 mm (3.41")Length: 772.13 mm (30.39") with bezel ------------- 758.29 mm (29.85") without bezel Weight A server with fully populated drives 34.5 kg (76.05 pounds) A server without drives and PSU installed 25.7 kg (56.65 pounds
