Dell PowerEdge R7625 Rack Server | Configurable

Express Computer Systems Verified independent store

→

Quick Specs Form Factor: 2U rack server Processor | Max: 128 Cores 2x Gen 4 AMD EPYC 9004 Series Memory | Max: 6TB 24 ECC DDR5 RDIMM 4800Mhz Storage | Max: 368.64TB Front bays: Up to 8 x 3.5" SAS/SATA (HDD/SSD) Max: 160TB Up to 12 x 3.5" SAS/SATA (HDD/SSD) Max: 240TB Up to 8 x 2.5" SAS/SATA/NVMe (HDD/SSD) Max: 122.88TB Up to 16 x 2.5" SAS/SATA/NVMe (HDD/SSD) Max: 245.76TB Up to 24 x 2.5" SAS/SATA/NVMe (HDD/SSD) Max: 368.64TB Rear bays: Up to 2 x 2.5" SAS/SATA/NVMe (HDD/SSD) Max: 30.72 TB Up to 4 x 2.5" SAS/SATA/NVMe (HDD/SSD) Max: 61.44 TB Supported in the 12LFF and the 24SFF Backplane Boot Options Boot Optimized Server Storage (BOSS-N1) Hot-SwapUSB RAID Controller: (Adapter PERC) S160 (SATA/NVMe SW RAID) H355, H755, H755N, H965i, HBA355i, HBA355e, HBA465e LOM 2 x 1GbE LOM card with BCM5720 LAN controller Networking Options | Max Speed: 4x 25GbE Ports OCP 3.0 x8 Mezz 3.0 Remote Management: iDRAC9 with Lifecycle Controller PCIe Slots Max: 8 Slot 1: 1 x8 Gen5 or 1 x8 Gen4 Full height, Half length Slot 2: or 1 x8 Gen4 Full height, Half length or 1 x16 Gen5 Full height Full length Slot 3: 1 x16 Gen4 Low profile, Half length Slot 4: 1 x8 Gen4 Full height, Half length Slot 5: 1 x8 Gen4 Full height, Half length or 1 x16 Gen4 Full height , Full length Slot 6: 1 x16 Gen4 Low profile, Half length Slot 7: or 1 x8 Gen4 Full height, Half length or 1 x16 Gen5 Full height, Full length Slot 8: 1 x8 Gen5 or 1 x8 Gen4 Full height, Half length GPU: Up to 2 x 300 W DW or 6 x 75 W SWNot supported on 12x3.5-inch configs and system configs with rear module installed Other Versions R73X Series R74X Series R75X Series R76X Series R77X Series (Click to View) Ideal for: Data Analytics High-Performance Computing (HPC) Virtual Desktop Interface (VDI) Virtualization The Dell PowerEdge R7625 is a 2U dual-socket rack server built to serve as the backbone of enterprise data centers. This high-performance server solution delivers ample compute power alongside flexible, low-latency storage options, available in both air-cooled and Direct Liquid Cooled (DLC) configurations. Dell PowerEdge R7625 Configuration Options Chassis Options: There are a few chassis options. Up to 8x 3.5" SAS4/SATA (HDD/SSD) Up to 12x 3.5" SAS/SATA (HDD/SSD) Up to 8x 2.5" SAS/SATA/NVMe (HDD/SSD) Up to 16x 2.5" SAS/SATA/NVMe (HDD/SSD) Up to 24x 2.5" SAS/SATA/NVMe (HDD/SSD) Up to 8x EDSFF E3.S NVMe Gen5 Up to 16x EDSFF E3.S NVMe Gen5 Up to 32x EDSFF E3.S NVMe Gen5 Rear Drive Options Rear drive support is limited to two configurations: 12 LFF and 24 SFF drive bays. When rear drive bays are installed, GPU support is not available, and some PCIe slots will be occupied as a result. Up to 2x 2.5" SAS4/SATA/NVMe (HDD/SSD) Up to 4x 2.5" SAS4/SATA/NVMe (HDD/SSD) AMD Processor AMD 9004 Series EPYC 4th Gen The Dell PowerEdge R7625 rack server supports up to two 4th Generation AMD EPYC 9004 Series processors, with up to 128 cores per processor for enterprise-grade performance. Enhanced processing efficiency comes from 32MB of L3 cache per core, while integrated I/O supports up to 128 PCIe Gen5 lanes on Dell platforms (AMD supports up to 160 I/O lanes in 2P configurations) — making this high-performance server solution ideal for HPC workloads. Cooling Options The Dell PowerEdge R7625 offers two cooling options for its AMD processors: air cooling or Direct Liquid Cooling (DLC). Air-cooled configurations support up to six high-performance Silver or Gold hot-plug fans. GPU configurations require Gold fans paired with an L-Type heat sink, as the Standard heat sink is too tall for GPU clearance. Direct Liquid Cooling (DLC) Optional Direct Liquid Cooling (DLC) is required for certain CPU SKUs and configurations on the Dell PowerEdge R7625. Systems with DLC installed and a 12-bay chassis require Gold fans, and any processor with a 400W TDP must use DLC for proper thermal management. DIMM type and chassis configuration should be verified before installing DLC, as not all systems support it. Refer to the technical manual and Thermal Restriction Matrix for complete rules, limitations, and configuration guidance. Supported Memory Dell PowerEdge R7626 DIMMs The Dell PowerEdge R7625 supports up to 24 DIMMs (12 per socket), with up to 6TB of total memory and speeds up to 4800 MT/s. The Dell PowerEdge R7625 supports registered DIMMs (RDIMMs), which use a buffer to reduce memory loading and enable greater density — allowing the platform to reach its maximum memory capacity. Unbuffered DIMMs (UDIMMs) are not supported. Memory Guidelines Supports registered ECC DDR5 DIMMs only DDR4 DIMM memory is not supported. Memory DIMM slots are not hot-pluggable. Do not mix DIMM module types within a memory channel All must be RDIMM or 3DS RDIMM module types with same ECC configuration. Do not mix x4 and x8 DIMMs with a memory channel. DIMM type DIMM rank DIMM capacity Single Processor Dual Processor MINIMUM RAM MAXIMUM RAM MINIMUM RAM MAXIMUM RAM RDIMM Single Rank 16 GB 16 GB 192 GB 32 GB 384 GB Dual Rank 32 GB 32 GB 384 GB 64 GB 768 GB 64 GB 64 GB 768 GB 128 GB 1.5 TB Quad Rank 128 GB 128 GB 1.5 TB 256 GB 3 TB Octa Rank 256 GB 256 GB 3 TB 512 GB 6 TB Networking Adapters LOM/OCP The Dell PowerEdge R7625 supports up to two 10/100/1000 Mbps Network Interface Controller (NIC) ports, available via the embedded LAN on Motherboard (LOM) and integrated Open Compute Project (OCP) cards. Max Ports & Speed LOM: 2x 10GbE OCP: 4x 25GbE Feature Specifications LOM card (optional) 1 GbE x 2 OCP card 3.0 (optional) 1 GbE x 4, 10 GbE x 2, 10 GbE x 4, 25 GbE x 2, 25 GbE x 4 The system allows either LOM card or an OCP card or both to be installed in the system. On the system board, the supported OCP PCIe width is x8; when x16 PCIe width is installed, it is downgraded to x8. Expansion Slot Options Max: 8 PCIe Slots The Dell PowerEdge R7625 rack server supports up to eight PCIe slots, including six full-height or two low-profile riser slots, with up to six x16 slots available. With more than 13 PCIe expansion riser configurations, businesses can find the right setup for their specific workload. Installing rear drives will occupy some of these PCIe slots. GPU Support The Dell PowerEdge R7625 supports up to two double-wide 300W GPUs or six single-wide 75W accelerators, with High-Performance Gold fans required across all GPU configurations. GPU support is not available on 12x3.5" configurations or systems with a rear drive module installed. Rear drive support is limited to two options: the 12 LFF and 24 SFF chassis configurations. PCIe Slots Slot 1: 1 x8 Gen5 or 1 x8 Gen4 Full height, Half-length Slot 2: 1 x8/1 x16 Gen5 or 1 x8 Gen4 Full height, Half-length or 1 x16 Gen5 Full height Full length Slot 3: 1 x16 Gen4 Low profile, Half-length Slot 4: 1 x8 Gen4 Full height, Half-length Slot 5: 1 x8 Gen4 Full height, Half-length or 1 x16 Gen4 Full height, Full length Slot 6: 1 x16 Gen4 Low profile, Half-length Slot 7: 1 x8/1 x16 Gen5 or 1 x8 Gen4 Full height, Half-length or 1 x16 Gen5 Full height, Full length Slot 8: 1 x8 Gen5 or 1 x8 Gen4 Full height, Half-length Config # RSR Configuration # of CPU PERC type supported Rear Storage Possible Config 0 0 2 Front PERC No Config 1 R1B + R4B 2 Front PERC No Config 2 R1B + R2A + R3B + R4B 2 Front PERC / Adaptor PERC No Config 3 R1Q + R2A + R3B + R4Q 2 Front PERC / Adaptor PERC No Config 4 R1P + R2A + R3B + R4P 2 Front PERC / Adaptor PERC No Config 5 R1S + R2A + R3A +R4P 2 Front PERC No Config 6 R2A + R4Q 2 Front PERC / Adaptor PERC Yes Config 7 R1Q + R2A + R4Q 2 Front PERC / Adaptor PERC Yes Config 8 U.2 R1 Paddle card + R2A + R3B + R4D Paddle card 2 NO No Config 9 R1B + R2A 1 Adaptor PERC No Config 10 R2A + R3B 2 Front PERC / Adaptor PERC Yes Config 11 R1-E3 Paddle card + R2A + R3B + 2U R4-E3 Paddle card 2 NO Yes Config 12 R1-E3X4 Paddle card+R2A+R3B +R4-E3 Paddle card 2 NO Yes Config 13 R1-E3 Paddle card+R2A+R3B +R4-SCMX4 Paddle card 2 NO Yes Storage Controllers Dell's RAID controller lineup includes the fPERC solution, which delivers a base RAID hardware controller without consuming a PCIe slot — using a small form factor and high-density connector to the base planar. Refer to the cabling guides in the manuals below for setup details. Boot Option The system supports a hot-swappable boot device (BOSS-N1), which holds 2x M.2 NVMe SSD cards. The system also includes a slot for an internal USB stick for boot purposes. For more detailed information on boot options, refer to the manual below. Supported storage controller cards Internal controllers PERC H965i PERC H755 PERC H755N PERC H355 External controllers HBA355e Internal Boot Boot Optimized Storage Subsystem (BOSS-N1): HWRAID 2 x M.2 NVMe SSD USB Software RAID S160 SAS Host Bus Adapters (HBA) HBA355i Power, Dimensions & Weight: Power Support up to 2 power supply units. 2800 W Titanium 200—240 VAC or 240 HVDC 2400 W Platinum 100—240 VAC or 240 HVDC 1800 W Titanium 200—240 VAC or 240 HVDC 1400 W Platinum 100—240 VAC or 240 HVDC 1100 W Titanium 100—240 VAC or 240 HVDC 1100 W LVDC -48 — -60 VDC 800 W Platinum 100—240 VAC or 240 HVDC Dimensions & Weight: Width: 482 mm (18.97 inches) Height: 86.8 mm (3.41 inches) Length: ----------- 772.13 mm (30.39") with bezel ----------- 758.29 mm (29.85") without bezel Weight Fully populated drives 34.4 kg (75.84 lbs) No drives or PSUs 23.3 kg (51.37 lbs) Show more