Part# 2090970001 Details The new D3 LED lights are built upon a decade of DENALI innovation to deliver the highest performing 36-watt street-legal driving light to hit the market. The D3 driving light features a signature TriOptic™ beam system that includes a spot and hybrid driving lens with each light pod. Unlike previous TriOptic™ lights, the D3 hybrid driving beam is ECE and SAE compliant to deliver an impressive street-legal high beam in North America and European Union countries. But what if you’re not concerned with street-legal precision and just want off-road outrageous? Denali has got you covered too! The D3 spot lens was engineered for maximum beam distance measuring over 1900 feet at 1 lux (per pair). No other 36-watt light even comes close. The spot beam is so impressive it actually outperforms top-tier competitor’s lights that are twice it’s size. TriOptic™ Lens System (includes spot and hybrid lenses with each pod). Best in class street-legal spot and hybrid beams (SAE/DOT & ECE certified). High-Intensity Series Cree LEDs outputting 2100 lumens per pod. DataDim™ 3-wire smart-dimming technology (compatible with all DENALI dimming controllers). DrySeal™ Submersible Waterproof light can withstand the most extreme environments. Impact PC™ Polycarbonate bezels won’t crack, fade or corrode like traditional aluminum bezels. LiveActive™ Thermal Management keeps the LEDs cool preventing the loss of light output from overheating. Low profile mounting bracket with stainless steel hardware included. Additional SAE/DOT & ECE certified hybrid driving lens included (spot lens installed). Pod Size: 3.5" (90mm) Round x 2.62" (66mm) Deep LED: (3x) 11 Watt Cree XP-P LEDs Power Draw: 36 Watts (3 Amps) Lumens: 2100 DataDim™ Compatible: Yes Operating Voltage: 9-32V DC IP67 Waterproof & Submersible Hybrid Lens Certifications: SAE/DOT J581 & ECE R112 Spot Lens Certifications: ECE R112The ground-breaking DialDim™ Lighting Controller features a multicolor halo dimming switch that allows you to independently turn on/off and dim two sets of auxiliary lights from a single consolidated wiring harness. The LED halo switch displays your exact settings and allows for effortless dimming on the fly. The blue halo controls light set one and the green halo controls light set two; simply double click to switch between the two circuits.The controller also features high beam, turn signal, and horn inputs to unlock intelligent flash features that can cancel your aux lights with your turn signal, flash your aux lights as a turn signal, or strobe your lights when you sound your horn. Independently control two sets of lights on/off and intensity level using the single DialDim™ Switch. The blue halo controls light set one and the green halo controls light set two. Double click to switch between the two circuits. Your auxiliary lights will automatically switch between your selected dim setting to full intensity with the factory high beam switch. Simply connect the blue input wire to your vehicle high beam circuit to enable this feature. A clever 0% dim setting on the switch allows your lights to be "off" during normal driving conditions but will jump to 100% intensity with your vehicle high beam switch. The lights will also react to turn signal and horn inputs in this mode but will remain off when no inputs are detected. When enabled the main lights (blue circuit 1) will cancel in sync with your signal to prevent "washing out" your factory turn signal. Simply connect the yellow and orange input wires to your vehicle turn signal circuit to enable this feature. When enabled your amber visibility lights (green circuit 2) will flash in sync with your factory turn signals. Simply connect the yellow and orange input wires to your vehicle turn signal circuit to enable this feature. When enabled your auxiliary lights on both circuits will strobe at 4Hz when you sound your horn. Simply connect the green input wire to your vehicle horn circuit to enable this feature. Both light circuits are electronically fused and can be set right from the switch itself! The halo will illuminate red to notify you when a circuit fused is tripped. Upon vehicle startup, the switch halo will flash green to indicate a healthy battery voltage, or flash red to indicate a battery voltage that is below 11.8v. If battery voltage drops below 10.8v the lights will not power on preventing you from being stranded. The switch halo will flash 4 red LEDs to indicate the low voltage condition.Includes:- (2x) D3 LED Light Pod (spot lens installed)- (2x) D3 Hybrid Lens- (2x) Hinge Mounts with M8 Stainless Steel Hardware- (2x) Wiring Pigtail- (1x) DialDim Smart Controller
Related
Related
Related
Related