Densopol 60 Heavy Duty PVC/Bitumen Fabric-Reinforced Tape Densopol 60 is a cold applied, synthetic fabric reinforcement coated with rubber bitumen adhesive and backed with a PVC film. SIZES AVAILABLE: 50mm x 10M - 24 Rolls Per Carton 100mm x 10M - 12 Rolls Per Carton 150mm x 10M - 8 Rolls Per Carton All Priced Per Carton. For the anti-corrosion protection of buried or immersed pipes and fi ttings. The tapes can be applied by hand or machine to weld joints, bends, bare pipe lengths and pipe fittings. Applied to marginally prepared surfaces (SSPC SP 2-3) Cold applied Good comformability Good impact resistance Excellent adhesion to pipe and self Excellent resistance to cathodic disbonding Compatible with common pipe coatings Prepare surfaces by removing all loose scale, rust or other foreign matter by wire brush. Surface must be clean, dry and free of grease. Apply thin film of Denso Primer D to all surfaces to be protected and allow to dry. Peel back interleaving and apply adhesive side of the tape to the primed surface and press down. Apply the tape spirally with enough tension to make it conform. Remove interleaving as wrapping proceeds. Overlap each turn by at least 1" (25 mm) or 55% to achieve double thickness.Irregular surfaces such as valves, flanges, etc. may require the use of Densyl Mastic or Denso Profile ling Mastic. Refer to the product sheets for these specific products for information on application and selection.
