This beige soft fall mat provides a crucial safety surface for play areas. Measuring 100 (L) x 100 (W) x 5 (H) cm, it's constructed from impact-absorbing foam encased in water-repellent vinyl. Importantly, these mats are rigorously tested to the AS 4422:2016 Soft Fall Standard, offering compliance up to a 1.7 metre fall height. These mats come with an approved joining system down the side of each of the mats that allows multiple mats to be joined together to cover a larger surface area. Here's why this soft fall mat is a helpful addition to your play space: Provides Impact Absorption: The foam core is designed to cushion falls, helping to reduce the risk of injury during play. Water-Repellent Cover: The vinyl covering offers a degree of protection against spills and makes cleaning easier. Complies with Australian Standards: Tested and compliant with AS 4422:2016 Playground Surfacing Standard, ensuring it meets recognised safety requirements for soft fall surfaces up to 1.7 metres. Reinforced Stitching: Each of the covers come with reinforced double stitching to ensure they don't split or separate. Replacement Covers Available: You have the option to purchase replacement covers, extending the lifespan of your mat. Suitable for Various Play Areas: Ideal for use under climbing frames, swings and other play equipment where falls are a possibility. Things to consider when purchasing Soft Fall Mat - 100 x 100 x 5 cm Beige: Joining System Compliance: Ensure that any system used to join multiple mats together also meets the required safety standards to maintain overall compliance like this mat. Not for Wet Weather: Despite the water-repellent vinyl, these mats should be stored indoors and not used in wet conditions. Regular Cleaning & Drying: Clean any dirt or spills promptly and follow the provided instructions for drying the mat after cleaning. Avoid Direct Sunlight: Prolonged exposure to direct sunlight can cause the surface to become hot and may also degrade the material over time. Surface Temperature Check: Always check the surface temperature of the mat before allowing children to use it, especially if it has been in the sun. Mat Firmness: Be aware that compliant soft fall mats are not designed to be soft, as this would not provide adequate impact protection. These mats are firm to absorb impact but also allow equipment to placed on the surface of the mat. Size: 100 (L) x 100 (W) x 5 (H) cm. Replacement Cover Colour Variation: Note that replacement covers may come in different colours than the original cover. Safety Information: WARNING! Adult supervision required. Do not use in direct sunlight. Surface of the mat can get hot in direct sun and can cause serious injury. Test surface temperature before use. Always check the current standards for your state but soft fall surfacing should be used for any play pieces or resources with a climbing height of 60 cm or more above ground level. Also ensure the soft fall covers an impact area of at least 1.5 metres from the edge of each of the play pieces or resources. Please ensure that play equipment is placed on top of the mats and not around the mats as this could result in the mats moving and causing injuries. This will result in a failure of compliance. If the joining system does not comply like this mat, the play mat system you use will fail compliance.
