Devil-Horn 7-string guitar kit featuring a mahogany body with a symmetric double-cutaway design, a bolt-on mahogany neck, and an ebony fretboard with pearl white trapezoid inlays and a custom VII marker. Standard 24 3/4" scale with 24 frets, two 7-string humbuckers, a Tune-O-Matic bridge with stopbar tailpiece, and black hardware throughout. Full Specifications General Orientation: Right-handed Number of Strings: 7 Scale Length: 628mm / 24 3/4" Size: Full Size Build Difficulty: Intermediate Electronics are supplied as a loose wiring harness, and pickup connections require soldering A seven-string setup takes more care than a six: nut slotting, intonation and truss rod adjustment all need patience Mahogany is an open-grain wood that benefits from grain filler before finishing Body Material: Mahogany Type: Solid Cutaway: Double Body Binding: None Body Top Veneer: None Neck Material: Mahogany Joint: Bolt-on Profile: C-shaped Neck Binding: None Truss Rod: Double Action Adjustable Fretboard Material: Ebony Number of Frets: 24 Inlay Shape: Trapezoid, with a custom VII marker Inlay Material: Pearl White Headstock Shape: Styled 3+4 Binding: None Nut: Black Plastic Nut Width: 48mm Electronics Neck Pickup: Humbucker, 7-string Bridge Pickup: Humbucker, 7-string Controls: 2 Volume, 2 Tone, 3-way Toggle Switch Hardware Bridge: Tune-O-Matic with Stopbar Tailpiece Tuners: Sealed Diecast Hardware Finish: Black Pickguard: None Cavity Covers: Black Control Knobs: Black and Chrome Strings: Standard Steel What's in the Kit Mahogany guitar body (unfinished) Mahogany neck with ebony fretboard (unfinished) 2x 7-string humbucker pickups Wiring harness (2 volume pots, 2 tone pots, 3-way toggle switch) Output jack and jack plate Black Tune-O-Matic bridge and stopbar tailpiece 7x black sealed diecast tuning machines with bushings Black plastic nut Black control cavity covers Black and chrome control knobs Mounting screws and ferrules Strings Guitar cable Allen wrench What You'll Need Depending on the finish and build you have in mind, you may need: For assembly: Phillips screwdriver, Allen wrench set, soldering iron and solder for the pickup and harness connections For finishing: Sandpaper (220-600 grit), wood grain filler, primer, paint or stain, clear coat (polyurethane or nitrocellulose lacquer) For setup: String winder, tuner, Allen wrench for truss rod and saddle height adjustment, nut files if you change string gauge No woodworking or routing required - all cavities, holes, and channels are pre-cut.
