Die-Rod is a replacement pressing rod for Pressing Dies. The pressing rod is made with the same material as the Die Sleeve but with a slightly smaller diameter to ensure the fit. SPECIFICATIONS: Material HRC 60 - 62 hardened steel Ra 0.08μm highly polished steel Max temperature: 200°C Model Number Die03Rod Die06Rod Die10Rod Die12Rod For Use With Die Die-03D Die-06D-B Die-10D-B Die-12D-B Dimensions E. Length: 29.5mmF. Head Thickness: N/AG. Diameter: 3.175mm (1/8") E. Length: 25.2mmF. Head Thickness: 5mmG. Diameter: 6.35mm (1/4") E. Length: 28.6mmF. Head Thickness: 5.4 mmG. Diameter: 10mm E. Length: 28mmF. Head Thickness: 5mmG. Diameter: 12.7mm (1/2") Package Content One replacement top pressing rod. Safety Precaution To avoid the risk of accidents and damage to the Pressing Die, please read these instructions carefully before installation and before using it for the first time. Read the manual, especially the die installation schematic, before the operation. Do not press flammable, explosive materials. The operator must wear protective goggles. You must have a hydraulic pellet press equipped with the Protection Cover, please click the pictures to the left to order. To avoid damaging the die core and sleeve, we strongly recommend pressing powder with a professional laboratory hydraulic press to ensure the evenest pressing interface and uniform pressure force. Application Notes Small diameter Pressing Die Rods are extremely vulnerable to off-center compression. Always check the pressing surface for good surface contact before applying load. Pressing Dies and replacement Rods are consumable and will not be covered by warranty. Related Products Pressing Die 1/8" - 3" Powder grinding & Mixing Drying Ovens Calcining & Sintering Hydraulic Press CIP - Cold Isostatic Press
