Description DIN flow cup viscometer for measuring viscosity / German standard DIN 53211 /Cup made of anodized aluminum / Also available as immersion cup DIN flow cup viscometers are viscosity meters to determine the viscosity of liquids. The flow cups are often used in industry and research laboratories. Due to the form of the measuring method, however, the determination is only carried out on low-viscosity liquids, since the liquid cannot run off through the nozzles if the viscosities are too high. Liquids with Newtonian behavior therefore give the most accurate results in the flow cup. The viscosity can be determined on the basis of the flow volume and the measured time that the liquid needs to run through the nozzle from the flow cup. The start time begins when the liquid emerges at the lower edge of the nozzle. It is stopped as soon as the liquid no longer flows evenly or the liquid breaks off. In addition, there are immersion cups that are suitable for quick measurements on site; these are only immersed in the material to be measured. As soon as you lift out the cup and the liquid comes out of the nozzle, you can start timing. After completion of the measurement, it is imperative that the flow cup is cleaned, as dried-on residues can falsify the next measurement result. It should also be ensured that no pointed or sharp tools are used for cleaning. Scratches and scrapes in the flow cup viscometer also affect the result. Highlights - Material anodized aluminum- Factory calibration certificate included- With overflow channel- Meets international standards- Stand available as optional accessory Specification Technical specifications Capacity 100 ml Diameter nozzle 4 mm ( ± 0.02 mm) Standard DIN 53211 Flow time 25 ... 150 Dynamic viscosity (mPA * s) 96.2 ... 680 Material cup: anodised aluminiumnozzle: stainless steel Dimensions 127/4 Ø interior 50 mmØ exterior 85 mmheight 70 mm Weight approx. 200 g Dimensions 127/4P (immersion cup) Ø interior 50 mmØ exterior 65 mmheight 78 mmhandle height 170 mm Weight approx. 215 g Delivery Scope 1 x PCE-127/4 DIN Flow Cup Viscometer1 x Glass plate1 x Factory certificate1 x Instruction manual N.B. Test stand not included. It can be ordered as an optional accessory (Order ID: BDG 130) Downloads Manual Datasheet Video Video Quick Start Video Mannual
