[In Store Pickup Only - Not able to be shipped] Dirty Down Gore effect creates bloody strands right out of the pot. Dip your tool then touch to a model or prop. Vary the amount of goop to create thin or thick strands for a disturbingly realistic look. Keep bottle sealed when not in use. Gore can be thinned if mixed with a small amount of acetone. If Gore becomes too dry, just mix a little acetone into the pot to make it runnier – if too much acetone is added leave the top off the pot to let a little evaporate until the correct consistency is achieved. Usage Instructions: Always clean the tool in spirit straight after use. Do not let the gore or snot fully harden onto any tool. Run strands of gore or snot between surfaces and allow to dry. Drying time varies depending on temperature – the warmer, the faster drying. IMPORTANT: See “peel back” label for full health and hazard information. Use in well-ventilated area.
