You Will Receive: - Distek Evolution 6100 Bathless Dissolution System- Calibration Probe- Vessel Platform Light with Power Cable- x6 1-Liter Dissolution Vessels- x6 Paddles- x6 Vessel Lids- x6 Heating Jackets- RS-485 Cable to connect and Autosampler (2700-0162)- Power Cable- 90-day Warranty Fully Tested and Working Without Issue: After its initial disinfection and inspection, our technicians tested the Distek Evolution 6100 bathless dissolution system with the following results: - Powers on and initializes: PASSED- User interface navigation: PASSED- RPM verified accurate: PASSED- Lower and raise paddles: PASSED- Paddle rotation: PASSED- Vessel heating jackets: PASSED- Vessel base light: PASSED Notable Service Performed: - Replaced vessel lamp assembly. Specifications: Manufacturer Distek Model Evolution 6100 Serial No. 6101667 Dissolution vessels Six standard/Up to seven vessels Volume 500mL - 1000mL programmable Vessel heating rate Approx. 1.5°C per minute RPM control range 25-300 RPM, digitally controlled, closed loop Resolution 0.1 RPM Accuracy +/-0.2 RPM Display LED,s, .75" (19mm) high Motor High torque, permanent magnet Vessel temperature control Independently controlled two-zone heater jackets Display resolution 0.01°C Accuracy +/-0.25°C Calibration Built-in calibration probe Shaft wobble Less than 0.010" (0.254mm) total indicator runout Program modes Manual (Individual vessel control), Automatic (Up to 100 pre-programmed methods), External (produKEY Memory Device) Interface ports RS-232 (2), RS-485 (1), Parallel printer (1) Power rating 115V, 50/60Hz, 15A Dimensions (W x D x H) 26 x 20 x 39 in Weight 150 lbs