Drill the bulkhead openings, cut the included hose to fit your layout, secure the connections and follow the video. Most installations can be completed in under an hour, including drilling, assembly and leak testing. No glue, primer or cure time: Build and fill your system the same day. Premium core components: Danner Aqua-Mag 1200 circulation, Ambohr SPA-124 ozone and the Plunge Crafters InlineO3™ injector. Modular by design: Reconfigure, move or service your plumbing without cutting apart glued PVC. Guided from start to finish: Your step-by-step build guide and complete installation video are emailed immediately after purchase. BUILT TO BE MOVED, NOT JUST GO TOGETHER Glued PVC works, but changing the layout later usually means cutting pipe and starting over. The Quick Connect system gives you a cleaner, more flexible build. Core fittings can be released and repositioned while clamped hose connections can be loosened with a screwdriver. That makes it easier to deep clean the system, move your plunge, prepare it for winter storage or adapt the plumbing when you upgrade your tub or chiller. COMPATIBILITY Designed for Rubbermaid 100 and 150-gallon stock tanks and other tubs with a flat mounting surface suitable for bulkhead installation Accommodates compatible tub walls up to 1 1/2 inches thick Includes 3/4-inch Female NPT chiller connections Chillers with 1/2-inch, 1-inch, BSP or other port configurations require the appropriate adapters, sold separately Ideal for DIY cold plunge systems up to 300 gallons Not sure whether the kit will fit your tub or chiller? Send our team a photo of the tub and your chiller port specifications before ordering. We will help you identify the correct setup. WHAT YOU STILL NEED A compatible tub or stock tank A water chiller with 3/4-inch NPT connections or the appropriate adapters An insulated stock tank cover, if desired Mounting hardware appropriate for your installation surface The basic installation tools listed below Tub, water chiller, insulated cover, adapters for non-3/4-inch NPT chiller ports and installation tools are not included. TOOLS REQUIRED Drill 1 3/4-inch hole saw PVC hose cutter Phillips screwdriver Flat-head screwdriver Channel-lock pliers WHICH DIY KIT IS RIGHT FOR YOU? Choose the Quick Connect Kit if: You want the fastest, cleanest installation with no PVC glue, primer or cure time. It is also the better choice if you expect to move, service or reconfigure your system later. Choose the Complete DIY Build Kit if: You are comfortable cutting and gluing Schedule 40 PVC and want the lowest upfront price. It includes the same trusted pump, ozone and filtration foundation with permanent glued plumbing. View the Complete DIY Cold Plunge Build Kit GUIDED BUILD. REAL SUPPORT. Your step-by-step build guide and full installation video are emailed immediately after checkout, so you can review the entire process before the kit arrives. If you have a compatibility or installation question, you can reach a Plunge Crafters cold plunge specialist for U.S.-based support.
