The 5-Channel DMX/RDM LED Decoder (D5-E class) drives RGB+CCT LED strips and fixtures from a DMX512 control signal. It features a bright numeric display for quick addressing, constant-voltage outputs, and RDM support for remote setup. Compact, reliable, and installer-friendly for venues, sets and architectural projects. Key Features DMX512 & RDM: Standard DMX control with remote device management for addressing and status. 5 channels @ 4 A each: Ideal for RGB+CCT (5-in-1) LED strips. Wide input range: 12–48 V DC constant-voltage systems. Numeric display & buttons: Fast channel addressing and mode selection. Installer-friendly: Compact body, screw terminals, clear labelling. Specifications Input voltage: DC 12–48 V Output: 5 channels, 4 A per channel (constant-voltage PWM) Max load power (per channel): 48–192 W (dependent on input voltage) Total current: up to ~20.5 A Protocol: DMX512 with RDM (address via onboard display) IP rating: IP20 (indoor use) Certifications: CE & RoHS Enclosure size (approx): 180 × 60 × 50 mm; ~0.4 kg gross Typical Wiring Power: Connect a suitable constant-voltage LED PSU (12/24/36/48 V as required by your LED). LED load: RGB+CCT strips to CH1–CH5 (observe polarity and current limits). Control: DMX IN/OUT daisy-chain. Set start address on the front panel. Use Cases RGB+CCT architectural cove and feature lighting Film/stage sets needing fine white-point control (CCT) Installations standardising on 12–48 V constant-voltage systems In the Box 1 × 5-Channel DMX/RDM LED Decoder (D5-E class) Quick start info (basic address/mode guide) Notes Use within rated current per channel; ensure adequate PSU headroom. Indoor use only (IP20). For enclosed installs, allow ventilation.
