Compact ADSR module for Eurorack Module A-140-3 is the single version of module A-140-2. It contains an ADSR type voltage controlled envelope generators with exponential curve shapes (charge/discharge curves of a capacitor) with voltage control for the envelope parameters. The basic functions of an ADSR envelope is described in the user's manual of module A-140. The voltage control of envelope parameters is mentioned in the user's manual of module A-141. But the A-140-3 has only one control voltage input CVT with attenuator available and one has to decide via the jumpers which parameters are controlled by CVT and into which direction. Details: The output voltage range for the envelope is about 0 - 10V (10V = attack peak). The time range of Attack/Decay/Release is about 1ms to 30s. By means of internal jumpers one can select which time parameters are controlled by the CVT input (e.g. D only or D+R or A+D+R). Socket CVT can be normalled to an internal fixed voltage (i.e. the switching contact is then connected to an internal fixed voltage). That way it's possible to change e.g. all time parameters simultaneously by means of the CVT control. Another jumper is used to set output 2 to normal or inverted envelope.In the factory CVT is assigned to all time parameters (A,D,R) zugeordnet, socket CVT is normalled to a fixed voltage and output 2 is not inverted.Changing the positions of the mentioned jumpers allows to modify the factory settings. The following document shows the positions and functions of the jumpers of the module: A140_3_trimming_potentiometers_and_jumpers.pdf Additional technical information: The voltage level of the used gate signal has to be at least +5V and the rising/falling slopes has to be fast enough. Otherwise the envelope will not work in the right way. We discovered that some modules from other manufacturers do not meet these specifications. In this case the level shifter module A-183-4 may help by connecting one unit of the the module between the gate source and the gate input of the A-140-2. The following controls and inputs/outputs are available: LED (displays the envelope output)A: manual Attack controlD: manual Decay controlS: manual Sustain controlR: manual Release controlGate InputRetrigger InputCVT Input with attenuator (CVT = CV Time)2 Envelope OutputsThe output voltage of the envelopes is 0 - 10V.The attack/decay/release times are approximately between 1ms and 30s. The output voltage of the envelopes is 0 - 10V. The attack/decay/release times are approximately between 1ms and 30s Power consumption: +30mA at +12V and 20mA at -12VDepth: 40mm4 HP
