The DPA 2012 Compact Cardioid Mic is the best all-around, generalist mic that you can find to cover a wide range of close-miking needs on the live stage. It is a robust and reliable condenser mic, best for single instrument pickup. Its specifically powerful characteristics make it an extremely flexible mic that will shine on many instruments, particularly those in the high-frequency range. The DPA 2012 is constructed to withstand rough handling on a hectic live stage. It has a thicker, more robust body construction of brass that is very durable and known for its corrosion resistance and tolerance against metal fatigue. In addition to the heavy-duty materials used, the surfaces of the mic handle and grille are treated with a protective black chrome finish, which ensures more graceful ageing. Features Durable, reinforced construction Excellent transient response Uniform cardioid directionality Outstanding SPL handling Natural and precise sound reproduction Specifications Directional pattern Cardioid Principle of operation Pressure gradient Cartridge type Pre-polarized condenser Frequency response 20 Hz - 20 kHz Effective frequency range, ±2 dB, at 30 cm (11.8 in) 40 Hz to 20 kHz Sensitivity, nominal, ±2 dB at 1 kHz 8 mV/Pa; -42 dB re. 1 V/Pa Equivalent noise level, A-weighted Typ. 20 dB(A) re 20 µPa (max. 22 dB(A)) Distortion, THD < 1% 148 dB SPL (151 dB SPL peak) Dynamic range Typ. 131 dB Max. SPL, THD 10% 153 dB SPL (156 dB SPL peak) Switchable attenuator, filters etc. - Rated output impedance 60 Ω Minimum load impedance 2 kΩ Cable drive capability 100 m (328 ft) Output balance principle Impedance balancing with Active Drive Common mode rejection ratio (CMRR) > 60 dB Power supply (for full performance) P48 (Phantom Power) Current consumption 0.7 mA Connector XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase Color Matte black Weight 83 g (2.9 oz) Microphone diameter 19 mm (0.75 in) Capsule diameter 17 mm (0.67 in) Microphone length 94 mm (3.7 in) Maximum output voltage, RMS 8.7 V (21 dBu) Polarity +V at pin 2 for positive sound pressure Temperature range -40°C to 45°C (-40°F to 113°F) Relative humidity (RH) Up to 90% Sensitivity selection tolerance (at 1 kHz) ±1.5 dB
