4060 Miniature Omnidirectional Microphone MicroDot Connector only Product ID 4060-OC-C-B00 4060 CORE Omni Mic, Normal SPL, Black, MicroDot 4060-OC-C-F00 4060 CORE Omni Mic, Normal SPL, Beige, MicroDot 4060-OC-C-W00 4060 CORE Omni Mic, Normal SPL, White, MicroDot 4060-OC-C-C00 4060 CORE Omni Mic, Normal SPL, Brown, MicroDot Adapters DPA have a wide selection of Microdot Adapters that can be used instead of terminating the Lavalier Microphone. Below are some of the most popular options: DAD6034 - 3.5mm Locking for Sennheiser DAD6019 - 3.5mm for Sony DAD6001-BC - 3-pin XLR (P48) with Belt Clip DAD6003 - 3-pin Lemo for Senn, Shure, Wisycom DAD6004 - Large 6-pin Lemo for Audio Ltd. & Micron DAD3056 - TA5 for Lectrosonics DAD6035 - 4-pin Lemo for Audio Ltd. Description The 4060 is a versatile miniature, perfect for use with wireless systems in a wide range of theatre, broadcast and film applications. It is especially suited to capturing nuanced speech but is also a fantastic solution for close-miking instruments. This mic exhibits an exceptionally accurate omnidirectional pattern and therefore does not need to be aimed directly at the sound source to achieve quality pickup. The omnidirectional pattern makes it less sensitive to handling noise as well as pop and wind noise. The mic handles sound pressure levels up to 134 dB before 10% THD occurs. It exhibits very low self-noise, making it well suited as a lavalier mic mounted in a clip mounted on the chest, where it provides a good balance between signal vs. noise. Available in four colors: black, brown, beige and white. An even more robust, heavy-duty version is also available:>> 4660 Heavy Duty Omni Mic, Normal SPL Features Exceptional audio quality Uniform, consistent sound between DPA mics Extremely rugged and reliable Small and unobtrusive; perfect for flexible and easy concealment Large selection of clips, windscreens, grids and other accessories Modular adapter system fits most professional wireless systems CORE by DPA All the 4060 Series Omnidirectional Miniature Mics come with CORE by DPA, a powerful technology at the heart of our miniature microphones. CORE minimizes distortion across the entire dynamic range, increasing audio clarity and openness. >> About CORE What's in the box 1 4060 Miniature Omnidirectional Microphone, Normal SPL 1 (attached) Soft Boost Grid for 4060 Series (DUA6001, DUA6003, DUA6005, DUA6017) 1 High Boost Grid for 4060 Series (DUA6002, DUA6004, DUA6006, DUA6018) Placement guide Sound (in this case voice) varies depending on the placement of the microphone on the body. >> The benefits and consequences of different placements Assembly guide The microphone comes with the Soft-Boost Grid attached. Pull gently to remove. To reattach (or attach the High-Boost Grid), press the grid into place on the microphone housing. To attach an adapter to the MicroDot connector, screw on gently yet firmly until you hear a click. Cleaning guide The cable and protection grid are the only parts that may be cleaned. Do not use any kind of cleaning fluid other than demineralized water. Avoid all kinds of spray or fluids containing chemical components to remove static electricity on or close to the microphone as this could cause damage to the electret layer. When mounting a 4060 Series Miniature Microphone directly on or close to the skin of a performer, care should be taken to avoid sweat from running into the microphone. If the microphone has been exposed to sweat, it must be rinsed out in demineralized water and left to dry out to recover its original specifications. Drying out the microphone between exposures to humidity will also help to extend its lifetime. If the microphone fills up with water it will not be damaged but can possibly turn deaf while the water is captured inside, behind the protection grid. Remove the water by shaking the microphone or drying it with a piece of lint free cloth. Cleaning the microphone grid During use in environments where the microphone is exposed to makeup or dusty materials, the grid may get clogged up. Make sure the grid is dry before re-mounting it on the mic housing. Cleaning the microphone cable Residue from tape, glue or makeup on the cable must be removed after use. Leaving these substances on the cable over longer periods of time may etch into the cable jacket and will make the cable more susceptible to breaks. The cable can easily be cleaned using organic oil (e.g. olive oil) or lukewarm, demineralized water. Do not bend the cable or rub it harshly since this may stress the inner cores of the cable and cause them to break over time. Specifications Directional pattern Omnidirectional Principle of operation Pressure Cartridge type Pre-polarized condenser Frequency response 20 Hz - 20 kHz Effective frequency range ±2 dB Soft boost grid: 20 Hz - 20 kHz, 3 dB soft boost at 8 - 20 kHz. High boost grid: 20 Hz - 20 kHz, 10 dB boost at 12 kHz Sensitivity, nominal, ±3 dB at 1 kHz 20 mV/Pa; -34 dB re. 1 V/Pa Equivalent noise level, A-weighted Typ. 23 dB(A) re. 20 µPa (max. 26 dB(A)) Equivalent noise level, ITU-R BS.468-4 Typ. 35 dB (max. 38 dB) Distortion, THD < 1% - Legacy 120 dB SPL RMS, 123 dB SPL peak Distortion, THD < 1% - CORE 126 dB SPL RMS, 129 dB SPL peak Dynamic range - Legacy Typ. 100 dB Dynamic range - CORE Typ. 106 dB Max. SPL, THD 10% 134 dB SPL peak Rated output impedance 30 - 40 Ω Cable drive capability Up to 300 m (984 ft) with DAD6001-BC XLR Adapter Power supply (for full performance) For wireless systems: Min. 5 V - max. 10 V through DPA adapterWith DAD6001-BC: P48 (Phantom Power). Will work from 12 V Current consumption Typ. 1.5 mA (microphone). 3.5 mA with DAD6001-BC XLR Adapter Connector MicroDot Color Black, beige, brown or white Weight 7.5 g (0.26 oz) incl. Cable and MicroDot connector Microphone diameter 5.4 mm (0.21 in) Microphone length 12.7 mm (0.5 in) Cable length 1.8 m (5.9 ft) Polarity Positively increasing sound pressure produces positive going voltage on MicroDot pin Temperature range -40°C to 45°C (-40°F to 113°F) Relative humidity (RH) Up to 90% Sensitivity selection tolerance (at 1 kHz) ±1.5 dB Typical response of a 4060 Typical directional characteristics of a 4060 Accessories Included 1 Soft Boost Grid for 4060 Series (DUA6001, DUA6003, DUA6005, DUA6017) 1 High Boost Grid for 4060 Series (DUA6002, DUA6004, DUA6006, DUA6018) Optional 2-Way Dual Clip for 4060 Series Lavalier Microphone (SCM0032-B) 4-Way Clip for Lavalier Microphone (SCM0013-B) Digital Audio Interface (MMA-A) Concealer for Lavalier Microphone (DMM0021, DMM0521) Foam Windscreen for Miniature Microphones (DUA0560, DUA0566, DUA0567, DUA0568) Makeup Cover for Lavalier Microphone (DUA0590) Foam Windscreen for Lavalier Microphone, Color Mix (DUA0570) Lavalier Microphone Holder for String Instrument (MHS6005) Gooseneck Mount for 4060 Series Lavalier Microphone (GM1600) Accessory Kit for 4060 Series Lavalier Microphone (DAK4060)
Related
Related
Related
Related