CONTENTS: 1x Ancient Ruins base RESIN Print SCALE: 25x50mm / 30x60mm / 40x60mm / 50x75mm / 50x100mm / 60x100mm / 150x100mm ⚠️ IMPORTANT DISCLAIMER ⚠️ Production & Condition:All of our miniatures and terrain products are 3D-printed and made to order. They will arrive unpainted and disassembled. Our pieces are printed using UV-cured resin or FDM-printed PLA filament and are scaled to approximately 28–32 mm, making them suitable for a wide range of tabletop games. Please Note:Due to the nature of 3D printing, visible layer lines (especially in FDM prints) may be present. Minor imperfections, support marks, or small areas of support residue may appear. Some light filing, sanding, or trimming may be necessary for optimal assembly. Small “scars” where support structures were attached are normal and not defects. Any remaining support material should be carefully removed using a sharp hobby knife and, if needed, warm water. Safety Notice:These products are not suitable for children under 5 years old and contain small parts that may present a choking hazard. They are not toys, but detailed scale models with small, delicate components that may break if handled roughly. Licensing:All models are sold under a commercial license obtained from various creators, Links can be found at the bottom of every page to our partners.
