Hanging Basket RemoverThe Hanging Basket Remover is a steel hoop on an aluminum rod: push the ring up under the basket, lift the hanger clear of the support wire, and bring the basket down without a ladder. The complete tool comes with a 10 in ring on a 36 in rod. Rings and rods are also sold on their own, so a crew can match ring diameter to pot size and rod length to the height of the basket line, or replace one half of a tool that has been bent.Pick the Component first, then the Size. The Complete Remover is the assembled tool, a 10 in ring with a 36 in rod, packed as a case of 3 for a crew. A Remover Ring on its own comes in 8 in, 10 in or 12 in diameter; the ring has to clear the pot rim, so size it against the container the crop is finished in rather than against the plant. A Remover Rod on its own comes in 36 in (3 ft), 60 in (5 ft) or 84 in (7 ft) of aluminum, and the longer rods are what you order when the ring is fine but the basket line is higher or a row further in from the aisle. Rings and rods are priced each, so a 12 in ring on an 84 in rod is a legitimate build if that is what the house needs.Specifications Ring diameter 8 in, 10 in or 12 in Rod length 36 in (3 ft), 60 in (5 ft) or 84 in (7 ft) Complete Remover 10 in ring on a 36 in rod Rod material Aluminum Pack The Complete Remover ships as a case of 3; rings and rods are each Configurations Component Size Part number Remover Ring 8 in 72380 Remover Ring 10 in 72381 Remover Ring 12 in 72382 Remover Rod 36 in - 3 ft HBRP-3 Remover Rod 60 in - 5 ft HBRP-5 Remover Rod 84 in - 7 ft HBRP-7 Complete Remover 10 in ring with 36 in rod - case of 3 10-72382 Key Features Takes finished baskets down off overhead lines without a ladder The ring lifts the hanger clear of the support wire so the basket comes straight down Aluminum rod keeps the tool light at full extension Rings and rods are ordered separately, so one bent part does not scrap the tool Rings in 8 in, 10 in and 12 in cover the common finished pot sizes Rods in 36 in, 60 in and 84 in cover low bench lines through high basket rows Ideal Applications Pulling finished hanging baskets down for grading and shipping Moving or spot checking baskets on overhead lines during production Retail garden centers taking baskets down for customers Rotating baskets between light zones without dragging a ladder along the row Replacing a bent ring or rod on a remover already in service Pair it with a Dramm Hanging Basket Handle so the same crew waters the line and takes it down, and keep Dramm Pick-Up Stix on the cart for the debris underneath.
