VigorSwitch G1280 high-performance, Gigabit smart switch with 28 RJ-45 ports + Fibre Ports The VigorSwitch G1280 is a high-performance, Gigabit smart switch with 24 RJ-45 ports (plus 4 additional Gigabit ports). The VigorSwitch G1280 features our latest generation of DrayTek's own switch operating system which is used across our range of enhanced switches. This enables a consistent user-experience and look-and-feel so that once you're familiar with one model, the others feel the same. The new UI is designed to be intuitive and efficient, whilst providing access to all of the product's advanced features. Enhanced Feature Set: The G1280's specification is packed with advanced features to aid reliability and switching performance to your network and is ready for the next generation with both IPv4 and IPv6 support. The G1280 has 24 standard (RJ45/copper) Gigabit Ethernet Ports, and four selectable ports (which can be set to either RJ-45 or SFP slots). Features for Quality of Service (QoS), VLANs and network/switch security provide additional flexibility. Central Management: The DrayTek VigorSwitch G1280 can operate in standalone mode and be managed through its web interface or you need to manage and monitor the switch remotely, or have several DrayTek VigorSwitches to administer, you can centrally manage and monitor them either with: A DrayTek router which supports switch management* (connected directly to the switch) *requires firmware update (est Q1 '18) or DrayTek's VigorACS management platform* *requires firmware update (est Q1 '18) The DrayTek VigorSwitch G1280 has 4 Gigabit SFP module ports which can be used instead of the corresponding RJ-45 ports Nos. 25-28. SFP slots are typically used for fibre transceivers. In comparison to 'copper' (RJ-45) cables, using fibre for connectivity provides longer range and resilience from electrical interference. The SFP ports provides compatibility with your choice of SFP modules (not included) and therefore the most appropriate medium for your application. If you use the SFP slots, then the corresponding copper port is not active but the others remain available. Features: 24+4 Port Gigabit Managed Switch: •24 x RJ-45 Ethernet Ports •4 x Combo RJ-45 or SFP (Fibre Module) Ports •802.3az Power Saving •802.1q VLANs (Tag, Port & MAC-based) •QoS for Application traffic prioritisation •Voice VLAN for QoS (OUI Mode) •Access Control List (ACL) •Port Mirroring & Link Aggregation •IGMP Snooping/Querier (Up to 256 Multicast Groups) •IPv4 and IPv6 Support •Centrally managed or standalone operation Technical Specifications: Dimensions: 441 x 197 x 45 mm (W x D x H) •Rack mountable: 1U •Brackets included for rack or wall mounting •Weight: 2.6Kg (excluding SFP modules/cables) Physical Interfaces: •24 10/100/1000BaseT Ethernet Ports (RJ-45 IEEE 802.3/3u/ab) •4 Selectable Ports (Nos. 25-28), use as either: •10/100/1000BaseT (Gigabit) Ethernet or •SFP (802.3z) •VLAN: •802.1q Tag-based VLAN •Port-based and MAC-based VLANs •Up to 4K VLANs (out of 4096 VLAN IDs) •802.1v Protocol-Based VLAN •Voice VLAN (OUI Mode) •QoS: •Support 8 priority queues •Port-Based rate control •Priority queue schedule (WRR or Strict Priority) •Class of Service •802.1p CoS •DSCP •CoS-DSCP •IP Precedence ToS •Network Security: •Access Control Lists (ACL) •Source and destination MAC •VLAN ID •IPv4/v6 address •Protocol •TCP/UDP port •Storm Control (Broadcast, Unknown Multicast, Unknown Unicast) •DoS Attack protection •AAA Authentication •Link Aggregation: •Combine multiple ports to increase bandwidth •8 Aggregation Groups •Up to 8 ports in each group •LCAP or Static setup •Supports traffic load balancing •Networking Performance: •Switching Capacity: 56Gbps •Forwarding Rate: 41.7Mpps •MAC Addresses Supported: 8K •Jumbo Frames up to 9KB •IGMP Snooping: •Up to 256 multicast groups •IGMP Snooping V2/V3 (BISS) •IGMP V2/V3 Querier •Immediate Leave •Management: •IPv4 & IPv6 Dual-Stack •Web User Interface (HTTP or HTTPS) •Firmware Upgrade/Backup by HTTP/HTTPS •HTTP (Non-TLS) can be disabled for increased security •Configuration Backup/Restore •Factory Default •System Reboot •LLDP(802.1ab) + MED •Command Line Interface (CLI) via SSH/Telnet •DrayTek Switch Management support (from routers) *requires firmware update (est Q1 '18) •VigorACS Compatible *requires firmware update (est Q1 '18) •SNMP (with Generic Traps) & TR-069 •Diagnostics: Port Status & Usage display •CPU/RAM Usage display •Event Log •Port Mirroring •Ping •Port-based cable test •Operating Requirements: •Power Input Requirements: 100-240VAC •Power supply: Internal •Maximum Input Power Consumption: 453.3 Watts •Operating Temperature:~0°C to ~40°C •Storage Temperature:-20°C to ~70°C •Operating Humidity: 10% to 90% RH (non-condensing) •ROHS & CE Compliant •Warranty : 2 Year Manufacturer's RTB
