🛠️ V3 DRAGON HUB Modular. Durable. Made for Flow. The V3 Dragon Hub is the powerhouse core of your modular Dragon Staff setup. Designed for quick spoke changes and long-term performance, it lets you swap between 6 or 8 spokes, and transition from fire to practice setups on the fly — no fuss, no downtime. 🔁 One hub. Endless possibilities. ⚙️ KEY FEATURES Material: 7075 Precision-Machined Anodized Aluminum Weight: Only 99g per hub — light enough to fly, tough enough to last Quick-Swap Design: Change your configuration in seconds Universal Fit: Compatible with 8mm spokes (Dragon Fire, Spiral Claws, etc.) Tube Compatibility: Fits both 19mm & 22mm outer diameter tubing 📌 IMPORTANT INFO You’ll need two hubs per Dragon Staff (one for each end) Pole, wicks, and spokes sold separately Price is per hub, not a pair 🔄 COMPATIBILITY ✅ 8mm Spoke Rods✅ Fire or Practice Spokes✅ Spiral Dragon Claws✅ 19mm & 22mm OD Tubes ⚡ ULTRA HUB Lightweight. Modular. Quick-Release. The Ultra Hub combines the versatility of the V3 with the lightweight performance of the F3, bringing you the best of both worlds in a streamlined, high-functioning dragon hub. Effortlessly switch between 6 or 8 spokes, and enjoy tool-free removal thanks to the built-in Fusion Quick-Release Locking Mechanism. Designed for serious flow artists who value speed, simplicity, and precision. ⚙️ KEY FEATURES Weight: Just 87g per hub – feather-light without sacrificing strength Spoke Configurations: Supports both 6 and 8 spoke setups Quick Release: Integrated Fusion Lock system — twist on/off in seconds Material Compatibility: Fits any aluminium or carbon fibre tubing with 19.1mm inside diameter Pole Compatibility: Designed for Fusion Aluminium or Carbon Fibre Ends 📌 WHAT TO KNOW Price is for one hub – you’ll need two for a full dragon staff Spokes and staff ends sold separately Built for maximum speed and modularity Feature Ultra Hubs V3 Hubs Attachment Inserts inside tubing (19.1mm) Attaches to outside tubing (22mm) Weight 92g each 120g each Compatibility Fusion Dragon Fusion Dragon and Contact Staff 3 or 4 Spokes Yes Yes Removal Twists on/off Needs an allen key Special Feature Quick release - End Caps No Yes* V3 Matrix Dragon Hub - Setup Instructions 1. Push the spacers into the inner edge of both sides of the hub. The hub is designed to fit a 22mm pole. Spacers can be used to downsize your hub to fit a 19mm pole, available separately or as ordered. 2. Insert the spokes. This one hub can setup as a 3 or 4 wick dragon.You’ll see 3 dots marked on the underside of the hub to show you a 3 spoke setup. 3. Tighten the grub screws to secure your spokes into position. Ensure they are screwed in tightly and always test your dragon before every use. 4. Position the two halves of the V3 hub onto the end of your staff. Swivel the locking bolt to connect the two halves and tighten using your allen key. Ensure the V3 Hub is clamped level with a metal end cap. Check that it is attached both to the staff and the end cap to ensure it will not fly off. Double check that your hubs are secure before each session of use, but do not over-tighten as this may crush your staff. WARNING: If attaching to a Carbon Fibre Staff then the Carbon Fibre should have an aluminium end cap inserted in the each end to help reinforce it. Position the V3 Dragon Hub in line with the aluminium end cap - see photo above for correct positioning. Failure to use end caps may cause damage to your staff, as the clamping action is very strong. This will not be covered by warranty. CARE & MAINTENANCE It's a good idea to remove and grease/oil the grub set screws and bolt from your hub to deter them from rusting. Do this more regularly if you live close to the ocean.
Related
Related
Related
Related